View Full Version : idleing to high
I have a problem with my idle being to high. any ideas on what it could be? I have already tried my idle adjust and fuel mixture screw. thanks
smorris
09-21-2005, 08:28 PM
Make sure the cable has a little slack in it at the thumb throttle.
Loosen the cable locknut and run it in till you have just a little slack, then readjust the idle speed with the idle adjuster on carb.
bwamos
09-22-2005, 09:14 AM
Also make sure you're getting a good seal on the airboot between the carb and the engine. If you're sucking air in there, it will make it idle fast.
Trx450always
09-22-2005, 07:33 PM
also check to make hot start is not stuck on.
Thanks for the replys. How can you check to see if it is stuck?
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.