LT80 mods, need help

[DVXchic]

Hi everyone.

Well we sold the ktm, when the $ comes we will be purchasing a new LT80,
We need to know the best upgrades for this little bike, pipe, a-arms, shocks, bigbore kit, you name it. we want it to look great too so graphics and seat cover.

Remember the KTM was quick so we dont want him to get bored with the 80. so please we need a little guidence from the pros.

Thanks, and we will post pics as things progress from the day we get it.

[LT80]

Trinity pipe,A-arms from ATV Racing in Phoenix,Works shocks.
There are no real grafix kits out there.There are seat covers in ebay.
Don't even consider a big bore. You need Moore power!:)

[MadSea862]

We've always used VPE for our stage 2 and stage 3 motor work for our LT80's. Fred can make um fly! We also ran progressive shocks. 4 1/2" travel front and rear. These shocks are identical and work the same if not better than works shocks. But that's just IMO. http:/www.vperacing.com (http://)

We also used Rocky Mountain ATV for all our tire and rim
purchases. We ran 19 x 6 x 10's ITP holeshots on the front &
18 x 6 x 8 on the rear. Stock axle with 1.5" wheel spacers also purchased from rockymountain. We never had any trouble with ours. Some may disagree but like I said we never had any trouble. We were also the odd balls in the group because our rider preferred the pull start so we removed the battery.http:/rockymountainatvmc.com (http://)

Also, a great alternative to tacky/cheesy graphics especially for the LT's is just simply race cut plastic as shown the photo below. We used carbon fiber tank and hood peice made by QuadTech but if my memory serves me correctly they no longer make the carbon fiber peices for the LT's. I could be wrong so don't quote me on that. Hope this helps even a little! http://files.photojerk.com/KSeaCrazy/Suzuki8.jpg

[DVXchic]

Thanks guys, I love the carbon fibre look, really makes it stand out.
I will post pics when we get the bike, and mods as we go.
Thanks again