rim offset ?

[Honda#4]

whats the widest rim offset u can get

[cdalejef]

Front or rear and for what bike?

[Honda#4]

for both, i have a 03 400ex , i heard that a 4+1 for the front makes it a inch wider dont know about the rear though

[cdalejef]

4+1 will make it narrower and handle better. 2+3 is the widest offset for front but will make it handle bad.
3+6 is the widest offset for the rear but can bend your axle easier.

[Honda#4]

thats if u ride hard isnt it, i kind of go easy on my stuff because i dont like it when stuff breaks. aint honda's stock offset 2+3 in the front or is it my imagination, so with a front end kit that has +2 a arms where would i stand on terms of with or with +3 arms.

[cdalejef]

Reguardless of how you ride it still won't handle as well as stock. Stock front wheels are more like 3+2.
+2 arms and stock wheels will put you at about 48" and +3's will be near 50".

[bwamos]

If your looking at arms.. go with +3 arms and get a 4+1 offset wheel. should be ~48" wide and will handle better than the 3+2. Puts the center of the wheel closer to the spindle pivot point.

Get a 2+2 axle with standard offset rear wheels.

[Honda#4]

thats what i plan on getting is +3 a arms and a 2+2 axle do u think durablue is good or gforce i want something that u can get hubs with

[cdalejef]

I would go with RPM or LSR, you can get hubs with both of them.

[Honda#4]

o i didnt know that thanks, on the lsr cant u put the stock hubs on or what. what about rpm axles anything special about them or not.

[fandl450r]

Yes you can run the stock hubs on both axles, the splines will match right up.

[Honda#4]

thanks alot, i was pretty scared there for a moment i thought that u couldnt put stock hubs with aftermarket axles but now i know. thanks

[400exrider707]

Originally posted by Honda#4
thanks alot, i was pretty scared there for a moment i thought that u couldnt put stock hubs with aftermarket axles but now i know. thanks

You cant run stock hubs on an X-33 axle! But thats a durablue so dont fret. Either an LSR or RPM axle! RAD also sells axles with hubs, but I dont think you can run stock hubs on those either.

[Honda#4]

thanks, now i know what to buy

[Honda#4]

i have another question will a 2+3 offset rim fit a 22-7-10 tire i need a reponse fast !!!

[cdalejef]

As long as its a 10" rim it will. It has nothing todo with the offset.

[Mxjunkie]

I have the 3 to 2's on my banshee. Made the front end wider. I didnt notice much a handling differnt in it being worse.

They do have a dip dish look to them though :p

[Honda#4]

thanks i needed to know that because i'm gonna get some itp holeshot hd's with the itp t-9 baja wheel from rocky mountain i been begging my mom to let me buy them because i need them fast.

[AtvMxRider]

Originally posted by Jeff@QuadShop
It has nothing todo with the offset.


You have no idea what you are talking about, I am asking Gabe

















:devil:

[400exrider707]

Originally posted by AtvMxRider
You have no idea what you are talking about, I am asking Gabe



















:devil: :D LMAO

[AtvMxRider]

Originally posted by 400exrider707
:D LMAO


I see somebody remembers:D

[cdalejef]

Originally posted by AtvMxRider
You have no idea what you are talking about, I am asking Gabe


Ok, sorry Tyrone.

[AtvMxRider]

Originally posted by Jeff@QuadShop
Ok, sorry Tyrone. :devil:

[motoboy66]

What about the rear off set? I know my buddy bought some baja for the rear, and they were wider, then he bought some hypers that were either the same as stock or just a little narrower, I need to know as i am planning on getting some for my rears. As for the front, go 4-1, i had 3-2, and it didn't handle as well as the 4-1 do. Wish I knew that befor I bought them, but live and learn.

Todd

[Honda#4]

when u go on the rocky mountain site, on the tires and wheel combo kit section, for the 400ex the front only gives u a 3+2 offset so what do u,call them and say i want a 2+3 offset or what.
and another question do u really need the pj1 sealent or not does that do anything.

[motoboy66]

They may not show the combo, but then will make it for you. just call and ask for what you want, i did it about 2 months ago.

[Honda#4]

i think im just gonna buy the front 22-7-10 hd's with the 3+2 offset and the rear 20-11-9 hd's with the 3+6 offset. I dont really ride that hard anyway.

[Honda#4]

today im gonna order my tires and gas tank i will post pics when i get everything done. ? can u use the stock lug nuts for those rims or do u need to buy some.

[EXMARK]

I just bought some ITP's for the rear, I got the 9x9. They are 3 to the inside and 6 to the outside, did I make a mistake? Is this going to bend my axle if I ride to hard? This is on a 400ex

[Honda#4]

heres my new tires