400ex rear axle problems

[400exrider33]

when it comes to four wheerlrs and engines i can pretty much get the job done. i have never taken a 400ex rear axle apart to change the bearings. if there is a trick to getting the axle and the axle nuts off or even to know the eaisest way to do it would be a big help thanks!!!

[UglyMotha™]

if there stock then heat em up with a torch there locktited out the wazoo and keep in mind there left handed thread, you must break the two nuts loose from each other, screw the inner one in farther and then the outer one remove the cir clip that is under the outer nut and the whole sleeve just slides right off

[400exrider33]

hey man thabks for the advice i ended up not needing to heat them i let them soak in rust penetrating oil and w/a little torque they came loose;)

[ZeroLogic]

wish mine was that easy we ended up having to grind it off:(