Fall clean out at Pappys!

[Pappy]

2 hiper fronts 4-1 offset in excellent condition. never even been raced on, just trail riding. Razor2 fronts installed and they have a ton of life on them. no plugs holes or leaks! $350 shipped

2 rear hipers stock offset with the dual honda or yamaha bolt pattern with Razor2 rears 20x11x9 in excellent shape with no holes or plugs and no leakes. $350 shipped

2 front burgard beadlocks with Klaws 22x7x10 fronts $225 shipped

2 rear burgard beadlocks with Klaws 20x11x9 $225 shipped

I will take and post pictures tonight.

what color are the hiper rings? also how much if you leave them at izzy's the next time you're ther and i pick them up?(i'm in harrisburg)

[Pappy]

red rings. ill post pics here in a bit.

knock off $25 per front/rear set if picked up.

[JDiablo]

what are the fronts for?

[Pappy]

Originally posted by 300exrida
what are the fronts for?

honda

[JDiablo]

You got a PM

[xsr_racing28c]

pm'd ya

[cletusEX]

pm sent

[Pappy]

hipers are all sold to cletusEX. a phone call beat the pm's fellas, sorry:p


here are some pics of the other rims/tires. they havent been used in almost a year and are all holding air fine. they need a bath and an afternoon of polishing but they work.

[Pappy]

fronts

[Pappy]

tons of life left on the kendas.

[Pappy]

also have 2 hot cams stage 2 for a 450R. new in the box's.

$100 shipped each


and a new set of standard ac nerfs for a 450r (might need some mounting bolts, the box was damaged in shipping and i cant honestly say of all the bolts are there. a trip to the hardware store could save ya some $) they did not come with heel guards.
$100 shipped

[Pappy]

NERFS ARE SOLD

[Pappy]

also a full set of black laker custom fenders with carbon hood. it has been ridden on and has the usual scuffs but cleans up nice.

$180 shipped.

this picture is to show the fenders when new, they have no cracks now, just usual scuffs etc.

[Pappy]

450r subframe in great shape. no cracks etc.

$140 shipped

[Pappy]

we arent 100% if we will sell off our back up quad, but chances are it could go if its someone fairly local or wanted to pick it up within a reasonable meeting distance or at one of the GNCC events.

2004 TRX90, all stock except 11-1 stock bore piston, big gun exhaust and dg nerfs, k&n filter, did chain,kill switch, powdercoated frame and will have stock tires and rims in good shape. runs excellent. $1650

[Pappy]

KTM65 runs STRONG! very well maintained. $1200

the only reason it is being sold is i cant bare to see the kid get hurt riding a bike. if he is going in a cast it will be from his quad:ermm: :macho

[Pappy]

I will have to check the year, im thinking 2003 but has seen little use at all. JR80, runs like new and looks like new.

$450

[Pappy]

ETON 50

relatively new, needs some carb work. idles high when started but settles down and runs until your kid poops out! needs a new starter, but i have that and will try and get it installed or you can do your own wrench work if it makes you feel more like a dad..lol

$700


i should have titles or certificates of origins for all these quads and bikes. each will come with a full bill of sale regardless.

not familiar with the jr 80....does it shift with a clutch? also what year is the ktm 65, does that have a clutch?

[BlazingYamahaYz]

Holy cow Pappy! I knew you had a few quads, but you keep pulling them out left and right, along with some bikes! I like how you said it's all stock on Cody's trx90 except for this and that and this too.:blah: Looks like some awesome stuff, too bad I don't have any money.:(

[Pappy]

lol..it is stock really. powdercoating is cool but underneath them thar is stock parts:p the 90 is a great deal, i probably shouldnt sell it but we are adding a 2 stroke mini to the stable.


i will have to get the wife to pull the titles for year verification. i think the ktm is a 2002 with a fresh top end. its way to fast for a beginner like my kid. it has a 6 speed tranny and a clutch...and one wicked powerband:chinese:

the JR80 is mellow, shifts with a clutch and i believe is only a 5 speed. i bought it off my neighbor after he found out his kid really needed something bigger and needed cash for it for the down payment on a kx80. im almost positive it is a 2004.

[jdwxv3]

I guess you no longer have the rear elka and link? If you do let me know please. Got the money ready and dont want to buy a new one.

[Pappy]

nada, sold the rear elka sometime back. i replied to your pm's...didnt you get them:confused:

[400exrider707]

If I wasn't in NY I'd prbably come pick that JR up right now:mad:

[jdwxv3]

Originally posted by Pappy
nada, sold the rear elka sometime back. i replied to your pm's...didnt you get them:confused:

No I did get the pms. Sorry.

[wvspeedfreak]

Mark me down for one of the hotcams.

[wvspeedfreak]

Maybe I'll just start running a tab at BK Performance lol :D

[onebad450r]

I'll take the other Hot cam......sent you a PM

[Pappy]

both hot cams are now sold!

[team_450_88]

Hey Pappy did u get my pm??

[Pappy]

Originally posted by team_450_88
Hey Pappy did u get my pm??

just read it, sorry:(

i can swap out the tie rods to get that fixed for you. i would suggest selling the arms you have and then buying the new heavier ball joint arms. if you want to do this let me know and i will get you a set and a deal since i know you have had problems. i dont have any ball joints, but i can pick up whatever you need tomarrow .

[400ex4rick]

sent pm interested in Eton and JR80

[red/white f4i]

my buddy is lookin for one...location ??

[Pappy]

Im about 4 hours from Jersey in west by god virginia

[vinson581]

2 rear hipers stock offset with the dual honda or yamaha bolt pattern with Razor2 rears 20x11x9 in excellent shape with no holes or plugs and no leakes. $350 shipped


would you consider just selling me the tires??? i dont needa another set of razr2's...just those red ring locks :)

[Pappy]

sold the hipers earlier in the thread. :D

[TD53]

pappy where in WV are you located?

[Pappy]

im in the middle of apple picker heaven, the eastern panhandle, berkely county

[TD53]

sorry to hi jack your thread, but what would it cost to have you powdercoat my wheels (leaving a silver lip) and my shifter black?

thanks

tyler

[TD53]

make the shifter red.. sorry

[Pappy]

rims run like $30 each. id have to see about masking the lip, ive seen it before, looks good

shifter levers are like $10

[450robot]

pappy im buying the beadlocks and tires!

[450robot]

new pm sent

[bigfoot300ex]

can you send more pics and info about the laker custom fenders to lheafner@earthlink.net
thanks

[Pappy]

ETON and JR80 sale pending

burgard beadlocks and kendas sale pending


i will get pics up of the laker fenders tomarrow evening .

[xsr_racing28c]

Pappy did you get my pm? I am interested in the Laker Customs, and the subframe... get back to me asap thanks < Jason

[Cj450R]

Where are u located, I am interested in the JR80 for my little one, if the other person does not want it.

thanks,
CJ

[bmw]

pappy, i live in frederick md how close are you to me? i am interested in getting some rims powder coated. thanks man

[Pappy]

i live about 50 minutes outside frederick, and work about 35 minutes south of frederick.

[Pappy]

Originally posted by xsr_racing28c
Pappy did you get my pm? I am interested in the Laker Customs, and the subframe... get back to me asap thanks < Jason

i tried, your pm box is full

[xsr_racing28c]

i cleaned it out about an hour ago.. try again.. sorry about that ~J

[diangelo#67]

hey pappy do you know anybody thats trying to buy a z400 with 450 motor and walsh stuff?

[Pappy]

Originally posted by diangelo#67
hey pappy do you know anybody thats trying to buy a z400 with 450 motor and walsh stuff?

no i sure dont, but i will ask around

[team_450_88]

Originally posted by Pappy
just read it, sorry:(

i can swap out the tie rods to get that fixed for you. i would suggest selling the arms you have and then buying the new heavier ball joint arms. if you want to do this let me know and i will get you a set and a deal since i know you have had problems. i dont have any ball joints, but i can pick up whatever you need tomarrow .

Ok, I really appreciate it Kenny aka Pappy
:D !! I have just had problems trying to get ahold of him because I work during the day and its usually later when I call!! If you would ball joints is all I need right now, until I sell my a-arms!! Also can u give me a price up-front on how much the better a-arms are gonna be for the 450r standard travel!! Again I really appreciate you helping me out, because I know it has nothing to do with you!! Also tell him I love his products, Ive just been through alot of ball joints..even adjusting them in!! But other than that they are awesome expecially for the price..U can PM me or just post back on here, either way ill check it!!

[450robot]

pappy, i sent the money and shipping info for the badlocks and kendas, just so you know

[cjj]

any yfz parts?

[UbeenSmoked]

PMed ya about fenders

Matt

[Pappy]

i rinsed of the fenders because they were dusty. i did NOT wipe them down with anything so hopefully you can get an idea of there condition.

[Pappy]

.

[Pappy]

fronts and hood.


remeber, these are used not new. and as i stated they have the typical riding scuffs etc. no cracks, no repairs. i just dont wanna trash them if someone can use a set of fenders.

[Prey]

pappy, are the fenders still up for grabs and would you be interested in bringing the to unadilla with you?

[Pappy]

there is not a youth race at the unidilla gncc so we wont be attending. to much for gas just to ride there to watch:p

[Quad18star]

Pappy ... dig deeper into the back of that garage of yours ... I know there's gotta be a set of XC a-arms and shocks that will fit a YFZ 450 or any parts for that bike for that matter . :devil:

[Prey]

Originally posted by Prey
pappy, are the fenders still up for grabs and would you be interested in bringing the to unadilla with you?

I will take them anyway, PM me your information and preferred method of payment

[team_450_88]

Hey Pappy, On the a-arm deal, for now I think Ill just put new ball joints on, atleast for a little while, but ill still try to sell and go from there. So if you will next time your by his shop will u pick some up? Also do I need to send them tie-rods I need swapped to you or to him? If I need to send to you whats the shipping address and you can just throw the balljoints in the tie-rod box when I send them !! Thanks ALOT

Ryan #18

[Pappy]

ryan, ill pm you my addy. i also need to know what length tie rods you need. i try and stock atleast one set of each length for folks that usually bend them up:p and also i need to know how many ball joints you need.



prey, ill pm you my paypal if that works for you?

[Prey]

paypal works for me man

[team_450_88]

Alright Pappy, Ill let you know everything!! Just PM me your email when you get time and Ill email you back letting you know!!

Thanks Again!!

Ryan #18

[trx400exxracer]

Hey pappy do you have any rear razr 2's in good condition if so let me see some pics.

How much does it cost to powdercoat wheels?

Do you have any reinforced wheels or strong aftermarket ones?

[Pappy]

i dont have any used razors...


and the only rims i have are new, beadlocks are $240 shipped or $260 pc'd stealth black

reinforced they are $80 shipped per rim

[trx400exxracer]

can I see pics of the reinforced wheels and do you have any other kind of xc tires in good condition

[trx400exxracer]

also do you have any nerf bars with heel gaurds and pegs that are better than stock

[trx400exxracer]

^^^^^^^^^^^^^^^^^^^^^^^
pics please I am interested in the reinforced wheels and if you have any nerfs I would like see pics of them to

[trx400exxracer]

I need some pics soon

[Pappy]

Originally posted by trx400exxracer
I need some pics soon

i dont have any reinforced rims here to get you a picture, and i already sold the nerfs earlier in this thread

[trx400exxracer]

does that mean you don't have any at your house but you still have some

I need 9 inch rear wheels what colors could you powdercoat the wheels or what do reccomend on a red 400ex what about the gun metal color

and how much to powdercoat a frame and sub,
Thanks alot man

do u have a hood for a 450r by any chance?

[trx400exxracer]

pappy are you going to respond

[Pappy]

whoa chief.....you ever hear of a pm? lol



i stock beadlocks in stealth black

there is not ahuge call for reinforced rims although i can get them anyday i like

i dont pick colors for people but stealth black seems to work real well for most quads....kind of looks like hiper's colors etc.

i have a stock R hood and a new white maier hood but thats all.

frame and sub are $175 to $225

[trx400exxracer]

I got around $250 but am on a budget what do you reccomend

[Pappy]

2 reinforced rims @ $80 = $160

2 rear kenda klaws or a set of used tires would run you 40 each (im speculating) so you could atleast do teh rears on your budget if you could find the tires.

[trx400exxracer]

I am buying new razr 2's (or my parents are buying)

Do you just have any regular wheels like strong ones without reinforcement I have a friend that can reinforce them

I guess I will just take some of those powdercoated

Oh and I need 9 inch wheels do you have any after market used ones

[Pappy]

i have nothing used at this time

if your buddy is going to weld reinforcing rings in, then you dont want coated rims:p try calling c&d racing and injuire about ITP's

[xsr_racing28c]

do you still have the full set of plastics? im interested

[Pappy]

Originally posted by xsr_racing28c
do you still have the full set of plastics? im interested

no i sure dont

[800screws]

do u still have the burgard yamaha front rims with klaws? if so
email me at
bdzierzek@hvc.rr.com
send me your paypal address.

[zlam27]

would you separate any of the rims and tires? how much tread is left on the full set of kendas (or whatever you have left), im really interested in the rears and possibly the fronts. let me know if you would separate.

zach

[team_450_88]

Pappy, whats your shipping address?

Thanks

[trailrunner77]

eton 50 sold or not?..... pm me back if it's not

thanks

[321racer]

do you still have the subframe for sale?