exhaust flange

[JR3]

Ok i went to take my header off. so i got the 1 flange off (its a 400ex) and the other wont come off and im prying and it wont come off i dont want to break it or anything. any help is appreciated.


thanks JR

[Iliketogofast]

Hit it with a hammer... You can probably knock it loose.

[JR3]

we tryed that but not very hard cause i dopnt want to damage my head

[EXracer83]

Use brass it won't damage the head.

[jak1389]

this happend to me. what i did was just a long peice of wood, place it at the bend of the header and tap it. f you keep tapping it the flange will slowy but surely come out.

[JR3]

well i just got doen with the block of wood and its right on the edge of comin off but wont

[JR3]

Well got it off and put my TC on yesterday. The jetting seems to be dead on i just have to richen it up a lil bit so should i just turn the fule screw in a lil bit.

Thanks JR

[bwamos]

Fuel screw will only noticably affect your richness at idle. If you need it richer at full throttle.. go up 1 main jet size.

[cals400ex]

tap it with a small hammer.