CDI mounting

[D Bergstrom]

I just purchased a 86 250r a couple of weeks ago. The question I have is the guy that had it has the regulator zip tied to the CDI box, and the CDI zip tied to the frame. I know they should have rubber mounts that hold them to the frame, where do the regulator and CDI mount with these rubber mounts? Does anyone have a picture "under the hood" of there R that shows where these mount? I just don't like the zip ty method and would rather have them rubber mounted.

Thanks,

Doug

[Dave83]

he cdi mounts above the left side of the radiator on the barb that goes towards the steering stem.I may have the rubber holder here,Ill check and see.

[Rich250RRacer]

On an 86, the regulator is mounted to a metal tab on the air intake. If you have no metal tab on this tube, somebody may have replaced the tube with one from a newer quad.