Who's got remote rezz's AND a steeting stabolizer?..need pics

[Texan32]

I am running Elka's with remote rezz's. I have the rezz's mounted on the front frame rails just below the nose (see pic). I really want to get a Denton steering stablizer. From the pics i've seen, i think the two will get in the way. Is anyone else running the setup i want? Can you show me a pic of how it fits!?

P.S. i've since fixed the crossover ring. It no longer has that homemake white ring in there :D

Texan you just need to move your rezzies back to the other frame rail,,here's a pic of how mine are on there...i've got shock rezzies, stabilizer, and tinners airscoops,,,I don't think there's enough room on my frontend to even wipe a booger..:eek: This pic should give you an idea of how I got my setup..

[knighttime]

i fit my works rezzy just above the steering stabilizer, i'll post a pic tomorrow

[Texan32]

Thanks guys

[knighttime]

look at this :eek:

Man talk about puttin 10 lbs of crap in a 5 lb bag..:D

[Zingnut]

Here is my setup.

http://zingnut.midwest.net/Pics/Wheeler/denton.jpg

[knighttime]

How come your denton stabilizer looks so much sweeter than mine?

How much was yours?

Did i get and older style? :confused: non-rebuildable :confused: :(

[Zingnut]

Yeah mine is about a month old and is the rebuildable one. I bought it from the QuadShop for I think 134 not positive but I am pretty sure it was close to that.

[400exRacerX]

wow you guys make it reall confusing up there with all that crap crammed together,,, I think Rico's way is the easiest,, especially if you are taking your quad apart alot.

Or you could just buy a PEP damper if you already dont have a damper.

[OCCRA288]

mcmike will agree they work great but the shaft broke on his some other guys also broke.

[PsychoDave]

since we are on the subject of PEP...do you guys think i could mount the PEP like the denton stablilzer....i have a pingrys oil tank and now the PEP doesnt fit. I rode without a stabilizer this weekend and it was HORRIBLE.

[mopar 400]

Texan 32, I am currently in the same dillema as you are. I just put a set of Elka's on my dads bike, and there is no room for the denton stabilizer. I have Works wit hressies and the ressies were small enough to be able to have the stabilizer sit below them. The Elka cans are HUGE. I mounted them on the front rails, but noww lost the stabilizer

I saw a post a while back, and the person had the denton stabilizer mounted so that the turn adjustment dial sticing out the side, where a set of air scoops would be. I cant figure how to mount all these little goodies now!!!!

NEED HELP

[R-Crazy]

sorry to stray away a bit, but,
Do they make steering dampners for a 300? and if so, how will i mount it w/ my oil cooler?

dave