86-250Rnut
09-09-2005, 12:02 PM
Well i was doing a little ridding on my R 2 days ago, and i was going up a hill and i over reved it. it ran fine after that for a little while. but i went to a feild to top her out and ran good. but when i stoped it started running hard. i tryed to go but it would dog out, i could hold it wide open and it would run at really low rpms. like really low. and rode it home like that and asked my dad what he thought and he didnt know. so i started it up. and it idled fine and reved good. put when i would try to go it would dog out . so at first i thought i fried the rings in it. but i got a psi gauge today{fricken 40 bux} and it had about 160-165. and i thought that was pretty good. now i think it may be a fuel issue. i will take and clean the carb out really good tonight. but if you know whats wrong please tell me or give me any info that you may have.
thanks alot for any help,
Mitch:macho
ohh and is 160-165 psi good for a pretty much stock motor with the upgrades listed below?
thanks alot for any help,
Mitch:macho
ohh and is 160-165 psi good for a pretty much stock motor with the upgrades listed below?