would this oil cooler work ?

[high_flyer_969]

could this oil cooler be used on a 400ex 2 keep it cooler?

http://cgi.ebay.com/ebaymotors/High-Performance-19-rows-Oil-Cooler-SUPRA-RX7-TURBO_W0QQcmdZViewItemQQcategoryZ35580QQitemZ45737 57417QQrdZ1

[high_flyer_969]

heres a pic

[fasterthanyouex]

i really dont know..but you should take them measurement and see if you can put that cooler in a spot....

[crazyatvn]

it would work but it is very big not to sure it would fit make a box out of cardboard and try to get it to fit.

[400exrider707]

Would it work with both the inlet and outlet on the top of the cooler? The stocker has the inlet on the top and outlet on the bottom right?

[crazyatvn]

I think it would That is what I am doing I am using one from a yamaha big bear they are both on the top.

[NacsMXer]

LOL no way, that's the EXACT same cooler as my DesertToyz Supercooler. It's three times the size of the stock unit and fits in the stock location. It really does a great job of maintaining operating temps. The way they mount it is by using long bolts with collars on them on each side of the cooler in order to attach a bracket with U-bolts on the top of the cooler. The U-bolts wrap around the upper frame rails to secure the cooler in place. They come with custom oil lines with AN and compression fittings so hunting those down may be tough.

400exrider707, the cooler is simply upside down in the pic. Mine mounts with the outlets facing down. I wish I had pics it's really a trick setup for modded motors; the cooler fits in the same spot like OEM.

[400exrider707]

Oh ok, yeah please post some pics if ya would, also how much did your desertoyz one cost, and how much extra oil do you put in? Thanks

[NacsMXer]

Here's the best pic of mine that I have right now. I would get better ones for you but I'm separated from the quad at school :( .
I believe I paid around 350 for it and it holds just under
2 1/2 quarts. I also had to "inscribe" a new UPPER mark on my dipstick (making the old UPPER mark the new LOWER mark). Notice in the pic how far down the cooler extends compared to stock. You can also see the custom oil line feeding from the side case.

http://fordtruckworld.tenmagazines.com/gallery/NacsMXer/516792.jpg

[400exrider707]

Ehh its kinda hard to see, but I get the idea, $350!! daayuummm. Trick bike by the way man.