Jasonskreationz
09-06-2005, 12:15 PM
I am looking for a nice 400ex, Z400 or some other nice 4 stroke. I really don't want a 300 or smaller. I have a few things I am willing to trade to one. Here they are.
First I have a 350 engine that puts out 450 horse power. Here's a little about it.
This built 350 bored 30 over will crank out 450hp. I built this motor for my project Sonoma. It has been started a few times but I never had it on the road yet since my Sonoma never got finished. Here's what it has to offer
4 bolt main block bored 30 over
forged flat top pistons
The biggest Comp Cams nitrous HP cam available and lifters (Grind: 274 Lift: .488''/.501''RPM Range: 2400-650000)
Eagle ''SIR'' I-Beam Connecting Rods
new crank
late model Vortec heads that have been machined with screw in studs and guideplates
new valves
Comp Cams Hi-Tech Triple Valve Springs
Comp Cams Valve Spring Retainers
Comp Cams push rods
all new bearings
high volume oil pump
double roller timing chain
polished professional products intake manifold
Professional products harmanoic balancer
polished alluminum flamed valve covers
S10 V8 heddman elite headers
JTR motor mounts
2.8 frame mounts (this will bolt right into your S10)
polished alluminum timing chain cover
chrome oil pan
alluminum roller rockers
jegs alluminum fuel pump block off plate
proform HEI distributor
Polished alluminum timing tab
180 degree thermostat
alluminum water neck with O ring with 360 degree adjustability
Alluminum double groove crank pulley
New water pump with lifetime warranty
New Starter with lifetime warranty
Painted Subaru's "Blue Ridge Pearl"
http://www.jasonskreationz.com/sonoma16.jpg
http://www.jasonskreationz.com/maysonoma03.JPG
Next I have a set of wheels that are S10 bolt pattern. Here is a Brand new set of Boss 304 wheels. 22" in the back, 20" in the front. Wrapped on the wheels in the rear is brand new Pirelli P Zero Nero tires in 295/25ZR22. This is not a typo, they are 25 series tires. In the front the are brand new Sumitomo HTRZ II in 245/35ZR20. These have only been mounted on my Sonoma and since the Sonoma is still an ongoing project that has never seen the road neither have the wheels and tires. They still have stickers on the tires! These wheels are absolutley perfect in brand new condition. They have never been out of the garage other than for these pictures and the frame was trailored to one show. Price is $2,000 firm. The only trades I will consider would be for a NICE street bike, Banshee, Raptor or 400EX quad. Feel free to email me with any questions on the wheels. Oh, the front wheels are 20x8.5 and the rear are 22x9.5. I will include the 20 chrome locking lugs and key too.
http://www.jasonskreationz.com/maysonoma07.JPG
http://www.jasonskreationz.com/maysonoma01.JPG
I will also conside trading the entire project truck above for 2 nice quads. They have to be mint becuase I have a TON of money wrapped up in the project. Here is a link to more pictures of all of the items.
The link is HERE (http://www.jasonskreationz.com/96sonoma.html)
First I have a 350 engine that puts out 450 horse power. Here's a little about it.
This built 350 bored 30 over will crank out 450hp. I built this motor for my project Sonoma. It has been started a few times but I never had it on the road yet since my Sonoma never got finished. Here's what it has to offer
4 bolt main block bored 30 over
forged flat top pistons
The biggest Comp Cams nitrous HP cam available and lifters (Grind: 274 Lift: .488''/.501''RPM Range: 2400-650000)
Eagle ''SIR'' I-Beam Connecting Rods
new crank
late model Vortec heads that have been machined with screw in studs and guideplates
new valves
Comp Cams Hi-Tech Triple Valve Springs
Comp Cams Valve Spring Retainers
Comp Cams push rods
all new bearings
high volume oil pump
double roller timing chain
polished professional products intake manifold
Professional products harmanoic balancer
polished alluminum flamed valve covers
S10 V8 heddman elite headers
JTR motor mounts
2.8 frame mounts (this will bolt right into your S10)
polished alluminum timing chain cover
chrome oil pan
alluminum roller rockers
jegs alluminum fuel pump block off plate
proform HEI distributor
Polished alluminum timing tab
180 degree thermostat
alluminum water neck with O ring with 360 degree adjustability
Alluminum double groove crank pulley
New water pump with lifetime warranty
New Starter with lifetime warranty
Painted Subaru's "Blue Ridge Pearl"
http://www.jasonskreationz.com/sonoma16.jpg
http://www.jasonskreationz.com/maysonoma03.JPG
Next I have a set of wheels that are S10 bolt pattern. Here is a Brand new set of Boss 304 wheels. 22" in the back, 20" in the front. Wrapped on the wheels in the rear is brand new Pirelli P Zero Nero tires in 295/25ZR22. This is not a typo, they are 25 series tires. In the front the are brand new Sumitomo HTRZ II in 245/35ZR20. These have only been mounted on my Sonoma and since the Sonoma is still an ongoing project that has never seen the road neither have the wheels and tires. They still have stickers on the tires! These wheels are absolutley perfect in brand new condition. They have never been out of the garage other than for these pictures and the frame was trailored to one show. Price is $2,000 firm. The only trades I will consider would be for a NICE street bike, Banshee, Raptor or 400EX quad. Feel free to email me with any questions on the wheels. Oh, the front wheels are 20x8.5 and the rear are 22x9.5. I will include the 20 chrome locking lugs and key too.
http://www.jasonskreationz.com/maysonoma07.JPG
http://www.jasonskreationz.com/maysonoma01.JPG
I will also conside trading the entire project truck above for 2 nice quads. They have to be mint becuase I have a TON of money wrapped up in the project. Here is a link to more pictures of all of the items.
The link is HERE (http://www.jasonskreationz.com/96sonoma.html)