Which axle lock nut?

[TORO1968]

I have decided to go with an RPM Dominator axle for my '03 Raptor, but I don't know which lock nut I should get.

What do you guys recommend out of these lock nuts?

RPM Pro-Loc
Lonestar w/dual pinch bolts
RAD (I think this only has a single pinch bolt, but I could be wrong.)


I would think that the RPM nut would work best on their axle, but I am not familiar with its design. I run a RAD lock nut on my 400ex and it seems to work well.

Any suggestions, opinions, etc. are greatly appreciated.

Thanks,
Jordan

[NacsMXer]

Get the RAD, does the same job as the others for a cheaper price. And BTW, I have one and it does indeed have two pinch bolts (at least the newer designed ones do). My axle's been tight forever and the nut hasn't backed off a bit :cool: :)

[hondarider2006]

I am running a RAD on my 400...and it OK. I always have to re-tighten it no matter how much I clamp it down, it always seems to come loose again. Not really sure if this is normal or if all aftermarkets do this. The price wasn't that bad tho...

[cals400ex]

i have heard good things about the baldwin, but it is more expensive too. i have heard complaints with the lsr one coming loose. this one is probably lighter because it has some aluminum.