PDA

View Full Version : mx 300ex with 350x engine parting out



nacs4030
09-02-2005, 06:16 PM
race ready 350ex for sale (300ex with 350x motor)
I have pretty close to a race ready 350ex that i want part. I really need to sell this because it is just sitting and i need money for college. If anyone wants the whole thing i'll sell it for 1400, but here's the list of parts. All parts will include shipping in the pricing.

stock 93 honda 300ex frame not bent cracked or altered in anyway: 160
It has ASR +2 a arms and tierods, (the a arms use heim joints which means no torn boots or greasing.) 370

Durablue axle which can be adjusted 0,+2,+4 150

2001 swingarm, and carrier with brand new bearings never been rode on,150

DG nerfs: 50

white brothers front mud screen bumper: 30



maier race cut front plastic which is brand new, not even scratched. Has 3 small holes on the front by the handle bars where i had the key switch and neutral and reverse lights but are easily covered up with a sticker. 75

DG rear grab bar: 30

350x motor has just been rebuilt on the first overbore with a wiseco high compression piston, also has brand new bottom end (new crank, rod and all bearings. Basically brand new engine except for the gears. Will come with powroll conversion kit, all stock 350x electronics, oil cooler, and clutch cable. Everything you need for the switch except the exhaust. : 700

aluminum handlebars, not sure what kind: 20

300ex carb :80

front hubs: 35

front brake system(everything) 75

real brake system 55

airbox: 35

front shocks: 40

rear shock 40

quadracer04
09-02-2005, 06:52 PM
I sent you a pm about the motor

bryan.young1
09-04-2005, 09:05 AM
PLEASE GET BACK TO ME I REALLY WANT THE MOTOR AND AXEL I TOLD YOU I WOULD PAY WHAT YOU ASKED???

THANKS
BRYAN

bryan.young1
09-04-2005, 09:15 AM
i could give you money to hold it and then the rest on the 1st.. please get back to me.

thanks
bryan

nacs4030
09-04-2005, 02:31 PM
333

bryan.young1
09-04-2005, 03:23 PM
if you post picks of the arms too i may take a look at buying those as well as the motor and the axel. thanks again and i hope you dont mind if i post

MOTOR- SOLD
AXEL- SOLD

THANKS AGAIN. CANT WAIT TO GET IT ALL TOGETHER. i will send you picks, when she is all done.

bryan

nyceguy01
09-04-2005, 04:40 PM
i need the front brake discs only how much????

bigfoot300ex
09-05-2005, 07:55 AM
is that $30 shipped for the front bumper?