12 bar

[(T) (L) (U)]

can someone please tell me how to make a 12 bar and could you guys and girls post pics of yours

[quadracer04]

12 bar?:confused:

[44oEX]

I am guessing you mean a grab bar?

why do you want to make one? just want something really strong? just use 2 plates for the side and weld a peice in for the middle.

[Nick110]

i think he means a 12 o'clock bar. like the guys on crotch rockets have to stop u from falling back. same thing as a grab bar just beefier and longer so u dont flip back as far.

[blasteracer24]

Well its not to sotp you from falling back really, its so you can do 12 o clock wheelies. Check out the stuntlife forums scroll down until you see the quad stunting section alot of guys have them in there. they should be able to help you.

www.stuntlife.com/forums

[(T) (L) (U)]

12 0 clock bar is wut i meant but i just shortended it hope it didnt throw you off

[TILLER]

what qaud ya got bro.. and ill get ya some pics

[(T) (L) (U)]

i got a 300ex

[TILLER]

Originally posted by (T) (L) (U)
i got a 300ex get yourself a piece of 1/4 thick flat stock.. about 3" x 8"s .. scrap your stock bar a lil bit (just to get an angle on it) then get a friend with a welder to tack it in place for ya at that angle.. works perfect

[400ex28]

Originally posted by TILLER
get yourself a piece of 1/4 thick flat stock.. about 3" x 8"s .. scrap your stock bar a lil bit (just to get an angle on it) then get a friend with a welder to tack it in place for ya at that angle.. works perfect

Yup my friend down the street did that lmao

[mc1984]

Be carefull if you make a 12 bar for your Honda. I made one for my 300ex. After many scrapes on asphalt it ended up breaking the frame. I repaired it and it happened again. I would say the trick is dont make it to beefey. That or reinforce the frame so it doesnt bend it up. Good luck!

[(T) (L) (U)]

how mch longer should i make it