PDA

View Full Version : 330 bore kit


Buzzsaw
06-08-2002, 11:02 AM
Who does the best 330 stroke and bore for $!!
bradley300
06-10-2002, 09:46 AM
a 330 is just a bore kit and i have heard without a oil cooler a 330 runs too hot so, i am trying a 309 first. i thing FST is a real good one though
Rastus
06-10-2002, 10:09 AM
Yeah, id say FST (FourStrokeTech) www.fourstroketec.com
And Yes, they do run alittle hot, so id invest into one of their oil coolers, and maybe an oil tank.
Im thinking about getting the 330 kit myself.
TRX_Thumper
06-10-2002, 12:49 PM
Who makes an oil tank for the 300? I have never heard of this.
Buzzsaw
06-10-2002, 01:20 PM
From want I can find Profab ATV a link off this site will do a 330 with oil cooler for around $1300. but I would like to know if anyone has had work done there or somewhere else to get some feed back on quality of work.
Scott
06-10-2002, 01:23 PM
I know there are a couple guys on here that have had their engines done by ProFab. Hopefully they'll post their thoughts.
Rastus
06-10-2002, 02:57 PM
Sorry, posted the link wrong.

www.fourstroketech.com

Their oil cooler systems are about 100$.
Im not to sure about the oil tank, but you could probably get a tank to put after the cooler, to help hold more oil.

Just my thoughts.
kid300ex
06-10-2002, 07:43 PM
what would a small bore be? like a 309 or a 300 kit? what all else would you have to replace in the motor with a small boring job?
Rastus
06-10-2002, 09:12 PM
With that small, all id say is a new bore, and piston. Or, a new sleeve and piston.
06-11-2002, 08:19 AM
There is nothing wrong with FST i would give mike at For Dirt Only a call. he spesializes in strickly 4- strokes. 740-967-1078
06-11-2002, 08:59 AM
also when you do a bore job go ahead and put a cam in it to, you won't notice the bore that much until you get a cam