PDA

View Full Version : FCR Carb, 40mm w/billet adapter


Ohtu02
08-30-2005, 08:12 PM
Also has jetting set up and ready to go. $385 shipped.
416HiRoller
08-31-2005, 06:45 AM
what is it for?
Ohtu02
08-31-2005, 06:48 AM
It's for whatever you want to use it on. 450R, YFZ, Suzuki, quads or dirt bikes. Four strokes!

This one is set up for a TRX450r with the billet adapter but the carb can be used elsewhere if needed.
cals400ex
08-31-2005, 04:34 PM
i have used mine on a 400ex. however, it is a snug fit. even with the noss adaptor, the carb was a little short. i just moved my air box forward probably a 1/2 inch or so. i used a dremel tool on my stock air boots so the carb would fit in. you could put the boots in boiling water and get them on but i prefered to bore them out a little bit. the carb worked great on my 400ex. the only problem i had was an instant miss when quickly hitting the throttle at low rpms. however, that was probably a jetting issue that i couldn't seem to find.