PDA

View Full Version : full throttle!?



400exrules
08-29-2005, 06:14 PM
How do you check to see if your throttle is opening all the way up? Cant you just wind it out and see if it hits the rev limiter, cuz my 400 will hit the rev limiter, but how can i check to see if im getting full throttle and the carbs openin all the way up


Thanks

mikeboone
08-29-2005, 08:44 PM
Originally posted by 400exrules
How do you check to see if your throttle is opening all the way up? Cant you just wind it out and see if it hits the rev limiter, cuz my 400 will hit the rev limiter, but how can i check to see if im getting full throttle and the carbs openin all the way up


Thanks

Remove the bolt holding the airbox to frame and slide the airboot back. You can look into back of carb while you push the throttle. This works well to set how mcuh free play you have in throttle before the slide goes up.

As your cable stretches you may have to turn the adjuster in some for in to fully open.