Kennethyfz450
08-27-2005, 12:04 PM
Originally posted by Kennethyfz450
Posting this up for mixxer! :bowdown: :clap: Hey everyone, this is 48Hp on a 435cc motor!!! Looks like Zonker is gonna kick some ***! Original post below:
what an awesome running Z old Zonk is
i had max power bore the stock cylinder after the ill fated athena 15 minutes of fame that was a waste of $$
these runs are also with VC-Pro cams of my own grind ... these are the do it all "Jack" grinds.... power across the board and easy on the valves + lightweight for long cam chain life .. i wont have time or $ for the prototype Maxx cams for the Z till after X-Mas..if even by then
i put it all together late last night and the drag is that i may have folded an oil ring ... i'm bummed !! all the others just smoked a bit till i got the rings burned in... i still have some smoke with Zonk after the burn in..
i can't stand the thought of another tear down and $$ for cylinder\piston.
the last time i saw a mag print claimed HP for the meg***** yoshimura\gust machine it was 51hp anjd the giant alba stroker was around 52hp
no stroker in Zonk, 435cc with stock valves too the Maxx grind specs will get Zonk to 50HP but with a bit less down low
the first run (of 40) Suzuki HammerHedz are due in any day now and the order will be split up between 12.25:1 and 14:1 stock bore plus 14:1 in 94mm 435cc
here's the runs compared to the last runs @13.5:1 stock bore when i first installed the Dyna CDI
http://www.trx450r.org/forum/uploads/post-327-1125086354.jpg
http://www.trx450r.org/forum/uploads/post-327-1125086406.jpg
http://www.trx450r.org/forum/uploads/post-327-1125086443.jpg
PS...nobody ask me for pricing....hook up with our site sponsor dealers for that!
All above from mixxer... Original post can be seen here:
Zonker dyno thread (http://www.trx450r.org/forum/index.php?showtopic=12165&st=0&p=126203&)
414171
here is a link that a member from z400central took part in.
http://www.z400central.com/invision/index.php?showtopic=42006&st=30
im gonna post this in the z400 section also
Posting this up for mixxer! :bowdown: :clap: Hey everyone, this is 48Hp on a 435cc motor!!! Looks like Zonker is gonna kick some ***! Original post below:
what an awesome running Z old Zonk is
i had max power bore the stock cylinder after the ill fated athena 15 minutes of fame that was a waste of $$
these runs are also with VC-Pro cams of my own grind ... these are the do it all "Jack" grinds.... power across the board and easy on the valves + lightweight for long cam chain life .. i wont have time or $ for the prototype Maxx cams for the Z till after X-Mas..if even by then
i put it all together late last night and the drag is that i may have folded an oil ring ... i'm bummed !! all the others just smoked a bit till i got the rings burned in... i still have some smoke with Zonk after the burn in..
i can't stand the thought of another tear down and $$ for cylinder\piston.
the last time i saw a mag print claimed HP for the meg***** yoshimura\gust machine it was 51hp anjd the giant alba stroker was around 52hp
no stroker in Zonk, 435cc with stock valves too the Maxx grind specs will get Zonk to 50HP but with a bit less down low
the first run (of 40) Suzuki HammerHedz are due in any day now and the order will be split up between 12.25:1 and 14:1 stock bore plus 14:1 in 94mm 435cc
here's the runs compared to the last runs @13.5:1 stock bore when i first installed the Dyna CDI
http://www.trx450r.org/forum/uploads/post-327-1125086354.jpg
http://www.trx450r.org/forum/uploads/post-327-1125086406.jpg
http://www.trx450r.org/forum/uploads/post-327-1125086443.jpg
PS...nobody ask me for pricing....hook up with our site sponsor dealers for that!
All above from mixxer... Original post can be seen here:
Zonker dyno thread (http://www.trx450r.org/forum/index.php?showtopic=12165&st=0&p=126203&)
414171
here is a link that a member from z400central took part in.
http://www.z400central.com/invision/index.php?showtopic=42006&st=30
im gonna post this in the z400 section also