PDA

View Full Version : wiring



cbmotorsports27
08-27-2005, 08:26 AM
my 250r has no stop switch does anybody now what wires splice into to put on a kill switch

Scott-300ex
08-27-2005, 12:18 PM
on a car it goes to the coil

so somewhere in the mag, the small wires

:huh

JDiablo
08-27-2005, 12:39 PM
the shorter one is your ground,and the longer one you have to splice it into your CDI i forgot which color,but i think a yellow/green wire

TheFontMaster
08-27-2005, 04:07 PM
One wire goes to ground, and the other hooks to your coil. However, I'm not shure which wire goes where.

KH426
08-27-2005, 08:30 PM
Use a test light, hook up to a good ground then prob the wires coming from the stator or coil. The one that kills it wins.

Scott-300ex
08-27-2005, 08:52 PM
On the switch it might say which one is positive and negative, if not, just switch them if it doesn't start in that position.