platinum350
08-26-2005, 11:52 PM
Hello, I am tuning up a friends TRX90 that has been sitting for a couple years. He wants it for his little kid. Anyway, everything looks fine now that I cleaned it down real good. The carb was coated in this hard film that must have been gas at one point or another. I had to actually sand the inside down to get rid of this film.
The problem I am having is that everything looks normal but the bike won't start. It has plenty of spark. I thought I might not have gotten something out of the carb, so I even sprayed carb cleaner in the spark plug hole.....nothing! Removed the air cleaner box and held the throttle WO and sprayed it through their as I tried to pull start it...nothing. I don't know what the compression is supposed to feel like while im pulling this thing, but it feels ok. I am just hoping that there isn't a broken ring or something.
So, please any suggestions for me to try would be much apreciated!!
Thanks!
The problem I am having is that everything looks normal but the bike won't start. It has plenty of spark. I thought I might not have gotten something out of the carb, so I even sprayed carb cleaner in the spark plug hole.....nothing! Removed the air cleaner box and held the throttle WO and sprayed it through their as I tried to pull start it...nothing. I don't know what the compression is supposed to feel like while im pulling this thing, but it feels ok. I am just hoping that there isn't a broken ring or something.
So, please any suggestions for me to try would be much apreciated!!
Thanks!