more teeth, more top?

[nj300exr]

i would like t know wich gives you mor top end, more teeth on your sprocket or less

more teeth more top end, but you loose bottum end

depends on what sprocket you want to loose teeth off of. less teeth up front means more bottom end...less teeth on the rear sprocket means more top end....comprende' :D

[nj300exr]

thanx guy but just outof curiosity, i would think it doesnt matter what end you change. like you said more teeth on back meen more bottom yet less teeth on front means more bottom, isthat true

Originally posted by nj300exr
thanx guy but just outof curiosity, i would think it doesnt matter what end you change. like you said more teeth on back meen more bottom yet less teeth on front means more bottom, isthat true

that's correct..:cool:

what sprocket setup to you plan on running? on my 250x i ran a 14 in the front for some top end you should try it

[ATV_MAN]

There is 1 more thing to know about sprocket sizes though.Increasing 4 sizes on the rear sprocket is like dropping 1 size up front. Understand? Changing 1 sprocket up front has the same effect as changing 4 sizes on the rear either up and down...hope this helps.

[phatswinn]

ATV_MAN you beat me to it!!:D but iheard 1 tooth up front is 3 in back, i also run a 14 tooth in the gront of my 300, you can just feel the difference

[ATV_MAN]

I dont know if its 3 or 4 but its somewhere in there.

[Leo]

gearing the bike up does not increas top end power.. it increases top end speed...

Leo