banshee pulls to one side!?!?!

[own3d]

hey all, im a proud owner of a 1998 limited edition shee. iv noticed that it likes to pull to one side. iv checked the tire presure to make sure there even but it still doesnt help. i cant seem to get her to track stright. im pritty sure the bars are bent so i dont know if that has something to do with it. any suggestions?

[450robot]

a while back when i had my 250r, the bearing in the bearing carrier for the axle went out on one side (sprocket side) and it would pull that way when i gave it gas


this may be your problem, might want to inspect those and see if it is

[own3d]

well, its worse when im on the gas. once i hit the powerband and the front lifts up it pulls, it does it while rolling too. ill inspect the bearning tomrow(today). thanks

[bradley300]

with as crappy as the stock rear end is, i wouldnt be suprised if that was your probelm. if you dont adjust the chain just right, it can get misalined and pull everything to one side

[red2004 TRX450R]

Originally posted by bradley300
with as crappy as the stock rear end is, i wouldnt be suprised if that was your probelm. if you dont adjust the chain just right, it can get misalined and pull everything to one side

THAT HAPPENED TO MY SHEE

[wilkin250r]

Probably only running on one cylinder...

[JDiablo]

Originally posted by wilkin250r
Probably only running on one cylinder...

If thats the case,you going to have a nice engine to deal with
But anyway,i was going to say your axle might be wiggling,but idk how the rear of a banshee looks like to much,so i cant offer any help besides this.

[speedy400]

Originally posted by wilkin250r
Probably only running on one cylinder...
lol.. either that or your right side headlight might be out...:rolleyes: -darren