Blaster problem

[Blaster x]

Well the other day i was riding. So then i stop to say hi to some friends. Then my quad just turns off...first i thought that one kid hit the kill switch..but he was like..i didnt touch anything. So i turned it back on..and then turned of on me again..My dad has been coming home late from work..well if u guy could help me out..i would really thankful..b/c saturday i have to go somewhere...let em know..thanks

[Blaster x]

anyone?

[fastrider450r]

it could be most anything, spark plug, water in gas, dirt in carb, needs rebuilt, also the other day my dads friend was working on a three wheeler and it wouldnt rev up because the main jet unscrewed and was just getting too much gas in the engine. Just check everything and see what happens.
hope i could help

[Blaster x]

hey..i went to go see whats wrong with it...well its starts right up but turns right of..well my dad comes home and said it may be the carb because it starts but the carb is full of garbage...wat do u think?..Also is this right plus to use?...BR8ES (NGK)

[fastrider450r]

i dont no what the plug is cause i never had a blaster, but their may be junk in the carb...do u run it screaming because if you do that then it shouldnt have anything in the carb, but then it may be blown up, cause its a 2 stroke. then if you bog it then their most definatly is junk in the carb then you need to clean the jets out and stuff.;)

[bradley300]

that plug is fine, but try changing it anyway. also, go on and take the carb apart and clean it also

[flyin#5]

does it turn off just at idle, or when your riding? a little more detail on what its doing would help narrow down the things id have you check.

[Trevor]

If I had to guess I would say the carb could be pluged,or an electrical problem somewhere.

[Blaster x]

Well today..i went to see...the plus is fine..but im gunna change it...it starts right up...but when i try to let it idle..it turns off..i think the carb is full of junk...so where should i start taking it apart?

[bradley300]

take the carb off and loosen this screw
http://i14.photobucket.com/albums/a308/bradley300/misc%20atv%20pics/carb1.jpg
now the whole top of the carb will screw off and the throttle slide will pull out.
then take off these 4 screws on the bottom of the carb
http://i14.photobucket.com/albums/a308/bradley300/misc%20atv%20pics/carb2.jpg
and you will see the main and pilot jets
http://i14.photobucket.com/albums/a308/bradley300/misc%20atv%20pics/carb3.jpg

take out those jets and spray the really well with carb cleaner. while there out, spay the entire carb down and put it back together. that should do it

[Blaster x]

thanks man..il do that

[blasteracer07]

also try tapping on the carbs float bowl with the handle end of a screw driver

[Blaster x]

hey..bradley300..could u take a pic of the carb all around because i may have a screw missing..and im not sure..also does anyone have a spare carb laying around??..or where i can get parts...another thing...are there manuals for these carbs?

[mars69]

Hey i had a blaster, now a raptor :P lol i had the same problem once, and found out that the fule switch was mounted rong, so i was always driving on reserve. Check that took just in case.

mars

[Blaster x]

thanks mars69..ill check it out

[mars69]

Originally posted by Blaster x
thanks mars69..ill check it out

yea and if thats not the problem i used to have a fule injection problem, and people at the survice center they did a bad job, thats why i ended up selling my quad to get my new one :) Yamaha raptor 350 cc :P i love it :P anyway of you need more info email me anytime i could help u?!


marcel_the_beaver@hotmail.com