PDA

View Full Version : timing


jamienlogan
08-15-2005, 10:00 AM
I cant get my quad timed. The two marks on the top gear are off a little bit. I cant get them to line up perfect with the cylinderhead. Does any one know how to get them marks lined up right?
duke416ex
08-15-2005, 10:14 AM
A lot of times they won't line up perfect. You can get you an adjustable cam gear or just leave it like most ppl.
cals400ex
08-15-2005, 02:30 PM
make sure your flywheel is aligned exactly on the "T" mark. then put the cam sprocket on. 2 of the marks should align the with the head and the other mark should face UP.
jamienlogan
08-15-2005, 04:27 PM
I did line it up perfet, but the marks are off.
Dannys440
08-15-2005, 09:17 PM
move the sproket one tooth to the front or back.
cals400ex
08-16-2005, 01:11 AM
what do you mean you tried turning the bottom sprocket??
660WickedRappy
08-16-2005, 10:30 AM
get it as close as you can....if you connot get it perfect just remember 1 tooth ahead is better than 1 tooth behind
jamienlogan
08-16-2005, 07:45 PM
Do I have to run 94 octain with a 440 big bore kit?
cals400ex
08-17-2005, 01:25 AM
the octane you run will depend mostly on the compression ratio of the piston you have.
jamienlogan
08-17-2005, 04:05 PM
Ill have 11:1 compression
2004exrider
08-18-2005, 10:09 AM
93 will be fine