3x440ex
08-13-2005, 04:39 PM
I have a hot cam 2 that was istalled and taken out the same day. i also have a Ross 416 HC piston that is brand new. i bought these last year when C&D was having their sale so i bought two sets(2 cams, 2 pistons) and only used one.
if you are interested i will sell you both the cam and piston for $180 shipped. i paid $250. the cam has about 15 min. on it, the piston is still in the box.
i put the cam in a stock bore cylinder and didn't like the lose of low end so i put the stock cam right back in. i used the other piston and cam in my other 400ex and it screems compared to the stock 400ex i have.
if you use the thinner gasket that C&D sells you have a 11.2 to 1 compression.
if you are interested i will sell you both the cam and piston for $180 shipped. i paid $250. the cam has about 15 min. on it, the piston is still in the box.
i put the cam in a stock bore cylinder and didn't like the lose of low end so i put the stock cam right back in. i used the other piston and cam in my other 400ex and it screems compared to the stock 400ex i have.
if you use the thinner gasket that C&D sells you have a 11.2 to 1 compression.