View Full Version : clutch???
yellow400ex05
08-12-2005, 11:45 AM
Where can I find a site that has a clutch kit to put on a 250ex. I'm thinking about getting one bc I'm going to have my quad for a while and i want to make a better quad than it is now.
YFZ450Ridr
08-12-2005, 12:03 PM
there isnt such a thing available for the 250..if you wanted a clutch get a 300ex or just go to a 400.
If you want it for wheelies you can pull the shifter up abouyt half way to a the next grear and you should be able to rev it and then jut let it down.
yellow400ex05
08-12-2005, 12:23 PM
Originally posted by banshee91
If you want it for wheelies you can pull the shifter up abouyt half way to a the next grear and you should be able to rev it and then jut let it down.
Wouldn't that just throw out my gearbox?
And 250exridr they do make a kit and i know it cost like $200 for one i even looked on rockymountainatv.com and they have clutch kits but they only have springs and plates not the actual kit.
YFZ450Ridr
08-12-2005, 12:37 PM
Originally posted by banshee91
If you want it for wheelies you can pull the shifter up abouyt half way to a the next grear and you should be able to rev it and then jut let it down.
and thats called a transmission slam:p and it is absolutely HORRIBLE for the tranny. your asking for trouble if you do that alot..
Originally posted by Yellow250ex04
Wouldn't that just throw out my gearbox?
And 250exridr they do make a kit and i know it cost like $200 for one i even looked on rockymountainatv.com and they have clutch kits but they only have springs and plates not the actual kit.
i may be wrong but that is probably just for stiffer springs and more heavy duty clutch plates. just to beef up your current system.
underpowered
08-12-2005, 01:14 PM
nuetral bombing is hard on parts. a clutch kit, to replace the spings, friction plates an steels is made by a few different companies. DP makes one, it is $90. you can buy parts individually from barnett, KG clutch factory, or some people like the stock clutches best. from KG clutch factory plate kits are $33 and springs are $11.
We used to do it alot on my friends 250ex and there hasent been a problem. I did not think that was bad for it.:eek2:
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.