PDA

View Full Version : question on carrier....


theTman
08-12-2005, 07:35 AM
does a 250r carrier fit in a stock 400ex swinger?? thena 250r axle...will i need a new sprocket hub,hubs,rotor mounts and such??

thanks
Pappy
08-12-2005, 07:41 AM
most 400ex/250r carriers are interchangable.

you would need the R axle, hubs, rotor hub and rotor, brake stay, rear caliper

if your looking to switch the brakes over only, a R brake stay and caliper and rotor is all thats needed.
theTman
08-12-2005, 08:03 AM
thanks pappy....thats the info i was looking for, also stock 400ex rear rims would bolt up since its honda pattern correct?
Pappy
08-12-2005, 08:04 AM
yep, the bolt pattern will be the same
Chino886
08-12-2005, 08:09 AM
Hey Pappy,

would a 250R carrier work inside of a roll design 400ex swinger? I have a 400ex lsr axle, am I going to have to get the 400ex carrier?
duke416ex
08-12-2005, 08:21 AM
I may be wrong but when I ordered my 400 carrier, they said they were the same carrier, just a different brake stay. Pappy can correct me if I'm wrong but the r carrier should work.

I've got a durablue r axle Tman, pm me if you are interested.
Pappy
08-12-2005, 08:34 AM
i have only seen 1 or 2 carriers that did not work but mainly they were no name brand and came with a no name brand swing arm.

i know that burgard carriers are the same for a 400ex/250R and i have interchanged them with no issues.
Chino886
08-12-2005, 10:32 AM
got any used ones for sale pappy?
Pappy
08-12-2005, 11:58 AM
no i sure dont. i try and keep a few new ones here, but at this time im empty. twin row usually sell for $150 shipped.
Chino886
08-12-2005, 12:27 PM
Hey Pappy,

I don' t mean to sound like an idiot, are all twin rows tapered? What is the benefit of a tapered bearing carrier?
Pappy
08-12-2005, 12:29 PM
no, not all are tapered.

tapered bearings allow for higher side load. i havent ever needed anything more then a standard, but others may have a need for it.
Chino886
08-12-2005, 12:32 PM
Hey Pappy,

I will be sending you a payment for the battery and maybe a bearing carrier in a couple of weeks. I want to get the wiring all figured out first so I am not trashing batteries.

Dave
Pappy
08-12-2005, 12:39 PM
no problem at all. pm me when you send the paypal so i know when to get her ready for ya.
Chino886
08-12-2005, 12:41 PM
you got a deal.