PDA

View Full Version : 450r jet ?


250xcheetah
08-10-2005, 01:22 PM
ive got a 450r with a baldwin exhaust and other than that its stock. so what jet should use.
redlined94
08-10-2005, 01:38 PM
open box, filter, full or slip on?????
250xcheetah
08-10-2005, 03:21 PM
its a full system, a stock filter, and air box lid on.
450ss
08-10-2005, 04:35 PM
well call the company and they will point you in the right direction and they will probally tell you to jet it without the airlid on or just cut the back half of the lid out to simulate the hrc lid but I am guessing that you will be at about 178 or 180 main jet , just start high on the jet and work your way down in sizes
JRP
08-10-2005, 06:22 PM
Originally posted by 450ss
well call the company and they will point you in the right direction and they will probally tell you to jet it without the airlid on or just cut the back half of the lid out to simulate the hrc lid but I am guessing that you will be at about 178 or 180 main jet , just start high on the jet and work your way down in sizes

yea call the company and they should tell you what jets to use.
redlined94
08-10-2005, 06:24 PM
I would take the lid off, get a UNI filter and then rejet it. You will get the best power gain like that. With all that like 450ss said it will be around 170-185 with the lid off and stuff. I got a dynojet kit and it told me what to put it and it was dead on after that so I would suggest one of those.