99 300ex

[quadracer007]

I,mlooking to make my 300ex wider and longer I heard that 400ex arms and swing arms are wider and longer do they fit?
Will it benifit me if they fit or is there a better option? :confused:

[300ex_#387]

Yes they do work, there are better options than the 400ex front end, but i will say there is no cheaper options unless you win the lottery, the 400ex a arms, tie rods, and shocks bolt right up you just ned to get the bracket relocator from ebay, a guy named diamondjcustoms made me mine and sent it with some stickers i got miune powder coated to look cool, they will widen it almost 4 inches overall. You might want to do some more searches first.

[kyleschonert]

the swing arm will fit if you weld some where on the frame for the linkage. BUt id just look around on ebay for a-arms. But, the shocks will work fine if they are valved for that geometry, but the a-arms are a bad idea. Get some 450R shocks and get them revalved, or get some works shocks with out the relocater. Theres some on ebaymotors right now for real cheap.

[reconmaster]

i have a 400 set up up front works awesone a lil frame modifacation will help hoevers doin the fabrication should be an expert not some alright welder

[300ex13]

the 400 arms arent the best idea but cheapest u cvan get a relocator and use 400ex shock or get custom length front shocks...i would just send the stock swinger in and add about and inch or inch and a quarter and find and 01 Raptor rear shock...great improvement