air inlet pipe

[250r4life]

anybody know where i can pick up an air inlet pipe for my 89?

[JTRtrx250r]

Im not sure what you are asking( granted I did just wake up:D )

Do you mean the intake?:confused:

[250r4life]

thats what its called in the clymer manuel. It is the plastic tubing that goes from the airbox up to the front. snorkel? ya'll know what im talking about.

Correct term is Insulator but people call it Intake Boot etc etc .....

This is from Reed to Carb


From Airbox to Carb is different its simply called the air cleaner tube, not pipe.

in automotive terms Pipes are usually hard plastic while tubes are fexible

Were??? try denniskirk they should have it or just get it from service honda.

if none of that is what your looking for then pick the number of it on this schematic :)

http://www.servicehonda.com/hard%20parts/atv/trx250r%2086-89/air_cleaner.jpg

only other thing you could be talking about is Aircleaner pipe itself which you call a snorkel.

[250r4life]

the clymer called it an air inlet pipe or whatever, but yah, i wouldnt myself call it a pipe, but more tubing or something. i'm not looking for the intake boot from the box to the carb, i'm looking for the plastic tubing from the box to the front of the quad... # 12 & 13 on that diagram... anybody know anywhere that sells it for a good price?

[JTRtrx250r]

you had it right, just ask around for a "snorkel" , thats what most ppl call them haha.

I have the front part of 1 that Im not gonna be using, if you can find the rear section, your more than welcome to it...lemme know;)