new pics with raptor shock on it

[hardkoratvmxr]

http://www.imagestation.com/picture/sraid179/pef7a7658d02343c264046eddf0da2ac7/f3115d26.jpg

[hardkoratvmxr]

http://www.imagestation.com/picture/sraid179/p17bcb08214c0c573d34e28016b16a6e0/f3115d16.jpg

[hardkoratvmxr]

http://www.imagestation.com/picture/sraid179/pc8a2dd662d63bbf7a1799097f9377dbd/f3115cc4.jpg

[hardkoratvmxr]

http://www.imagestation.com/picture/sraid179/pcd265b0b72ccdd272695dd9d982fd16c/f3115ca8.jpg

[hardkoratvmxr]

http://www.imagestation.com/picture/sraid179/p3c8aacd9916f3c8018dbc45686e42747/f3115cbc.jpg

http://www.imagestation.com/picture/sraid179/p249640a401ac24a52d52c9257029db06/f3115cb3.jpg

http://www.imagestation.com/picture/sraid179/p2654effa8a61edf6f8df80b5428ea46e/f3115c97.jpg

http://www.imagestation.com/picture/sraid179/p2dfd6c5ba4ba6f46059d93e0e412b99d/f3115c8b.jpg

[MX300ex]

looks real good...that lsr axle will look good to

[hardkoratvmxr]

o yea it will and when i get my +4s in it will look even better up front with my black beadlocvks that i still dotn have tires for :mad:

[Trevor]

Looks good hopefully I will have one on mine in a few weeks. I ordered on off ebay but after the paypal wen't through I havn't herd from the guy. I am just hopeing that he wen't on vacation or something. Anyway how did the shock mount up did you have any problems also did you use spacers for the mounts. Could you get a couple close up pics of it.

[hardkoratvmxr]

i had trouble on the upper mount because we couldnt get the shock body up far enough because of the shock mounts and i am not running any spacers and i pot my rezzy throguh the upper and lower frame rail near the next to your blue chip and put it behind my reverse lever.

[400ex28]

looking good charlie, those levers look awsome......can you tell a big difference with taht rappy shock?

[hardkoratvmxr]

the rappy shock is awesome i juss need to figure out how to adjust iot rebound is a lil quick

looks good charlie

[hardkoratvmxr]

thanks new things coming are front black beadlocks with +3+2 offset +2+4 lsr axle and 20x6x10 razr mx front tires

your 300 is going to be awesome once you get all that stuff

[quad janern]

yeah

awsome 300.

soon i`ll get mine:D

[bwamos]

If it's not level when sitting on it you need to try to drop the ride height on that rear shock. You're front end is going to want to dive on you when you brake into corners. You want your frame close to level when sitting on it.

[300ex73]

Originally posted by hardkoratvmxr
thanks new things coming are front black beadlocks with +3+2 offset +2+4 lsr axle and 20x6x10 razr mx front tires

You really should've gotten the 4-1 offset rims. They'll make it handle better. Plus if you're running the Burgard +4's, those rims will prolly push it over the 50 inch limit. I am running the stock rims right now, and it's pushin the limit of 50 inches. Also, you might wanna look into some ITP 9x9 inch rims for the back. Otherwise, you'll basically have a front end that's wider than the rear.

Also, the rear section of the frame looks to be sitting kinda high. Sit on the quad, and have someone measure the distance from the ground to the frame just in front of the peg mounts. Then compare that to the distance from the ground to the frame just behind the lower, rearward mount for the arms. The rear of the frame should be about 1/4 to 1 inch lower than the front. It'll really make a difference on the handling.

[hardkoratvmxr]

but ot lower the ride height dont i loose some travel because i have to adjust preload?

[Reggie]

**yawn**

[rollie]

if i where you id be saving up for new front shocks

[400ex28]

Originally posted by nacsracer12
if i where you id be saving up for new front shocks

he has works just needs to get them re-paired :)

[Cody_300ex]

Originally posted by 300ex73
You really should've gotten the 4-1 offset rims. They'll make it handle better. Plus if you're running the Burgard +4's, those rims will prolly push it over the 50 inch limit. I am running the stock rims right now, and it's pushin the limit of 50 inches. Also, you might wanna look into some ITP 9x9 inch rims for the back. Otherwise, you'll basically have a front end that's wider than the rear.

Also, the rear section of the frame looks to be sitting kinda high. Sit on the quad, and have someone measure the distance from the ground to the frame just in front of the peg mounts. Then compare that to the distance from the ground to the frame just behind the lower, rearward mount for the arms. The rear of the frame should be about 1/4 to 1 inch lower than the front. It'll really make a difference on the handling.

There is no way your at 50 inches on +4 a-arms and stock rims! a stock 300ex is 43.5 + 4 + 1 equals 48.5 add about .5 for the a-arms sqwating when you sit on it. So the MOST you will be at is 49 inches. Its also hard to find a axle for a 300ex that is a full 49 - 50 inches. Most of them are around 46-48.

[300ex73]

Well, I just got the Burgard +4 front end, and trust me, it's just a little more than 4 inches, by about an inch on each side(a set of +4 control arms isn't +4 altogether, it's +4 per side). I've only had time to get one side mounted up so far, but yes it came in at just about 5 inches wider. So they really add about 10 inches. Trust me, I wouldn't have posted that if I didn't know what I was talking about. And I don't know where you got the 43.5 for the front end? Cuz I spent hours measuring out everything on the front end and mine was about 39.5-40 inches from the outer edge of each rim.

And yes, the axle only gets the rear end to about 48 inches. But if you check around, ITP makes a 9x9 inch rear rim that has a 3x6 offset that will push the rearend out another 2 inches(50 inches overall width). Those are the rims I'll be running once I get a few more bucks saved up.

And as for lowering the ride height of the rear. Yes, you'll lose some ride height as far as clearance, but it shouldn't have much of a significant impact on the travel of the suspension. Once you do lower the ride height. Just make sure to take the time to adjust the rebound and compression adjusters.

[rollie]

Originally posted by 400ex28
he has works just needs to get them re-paired :)

yeah ik, but one works on stock must suck :scary:

[400ex28]

Originally posted by nacsracer12
yeah ik, but one works on stock must suck :scary:

he raced it like that at the last race and got 2nd place lol:p

[rollie]

Originally posted by 400ex28
he raced it like that at the last race and got 2nd place lol:p

maybe i should try that then:p

[hardkoratvmxr]

yea it wasnt bad just when you hit a jump you went sideways like a whip overall isnt bad though

[hardkoratvmxr]

here is a video that i made of a few different races and i would like to thank shift 400ex for the help and rebelrider34 for taking pics and in the video are my teammates 400ex28 and seth (not an exriders member)

http://www.eengoedidee.nl/videoz/mx/my_big_race_video.wmv

[Cody_300ex]

Originally posted by 300ex73
Well, I just got the Burgard +4 front end, and trust me, it's just a little more than 4 inches, by about an inch on each side(a set of +4 control arms isn't +4 altogether, it's +4 per side). I've only had time to get one side mounted up so far, but yes it came in at just about 5 inches wider. So they really add about 10 inches. Trust me, I wouldn't have posted that if I didn't know what I was talking about. And I don't know where you got the 43.5 for the front end? Cuz I spent hours measuring out everything on the front end and mine was about 39.5-40 inches from the outer edge of each rim.

And yes, the axle only gets the rear end to about 48 inches. But if you check around, ITP makes a 9x9 inch rear rim that has a 3x6 offset that will push the rearend out another 2 inches(50 inches overall width). Those are the rims I'll be running once I get a few more bucks saved up.

I know what +4 means, I got 43.5 off Hondas website. 43.5 is the TOTAL width of the front end, not one side.

[300ex73]

Originally posted by Lil_300Ex_Kid
I know what +4 means, I got 43.5 off Hondas website. 43.5 is the TOTAL width of the front end, not one side.

I never said that 43.5 was for one side. I said that I've only mananged to get one side of the control arms bolted up so far, and the TOTAL width was 44.5 inches without me on it. And the front end is not 43.5, it's 39.5. If the front end were a total of 43.5 inches, and you added a set of +4 arms, there's no way you could keep it under 50 inches. The rearend however is 43.5 stock.


Originally posted by Lil_300Ex_Kid
There is no way your at 50 inches on +4 a-arms and stock rims! a stock 300ex is 43.5 + 4 + 1 equals 48.5 add about .5 for the a-arms sqwating when you sit on it. So the MOST you will be at is 49 inches.

If you know what +4 for control arms means, then why did you only add 4 inches to the total width?

Like I said, I know what I'm talking about on the +4 front end. And if he plans on MX'ing, he's gonna be too wide with 3-2 rims. my best guess, would be that he's gonna be between 51 and 52 inches if he keeps his ride height at or around 9-9.5 inches without the rider. And prolly a good 52 to 53 inches at the most with him on it. Even wider if he get's it down to the recommended 7.5 inches with the rider in position. My ride height is about 8.5 inches in the front and 8 inches in the rear with me on it, and I can tell it's gonna be too wide.

But, if you want more proof, I'll try to get it finished up today, and get pictures as soon as I can.

[300ex13]

hey Charlie let me know how that rappy shock and that hotstart clutch lever works out...i heard u got a lsr axle real cheap..?!?!?!

[Trevor]

hardkoratvmxr I realy need you to take a picture of your rese for your raptor shock so I can see how you have it routed. I need a real closeup pic of just the rese area and frame. I have mine all on but the rese just won't fit right there isn't enough hose to get it to mount vertical.So O have it mounted sideways right now.

Thanks!

[kyleschonert]

hey hardkoreatvmxer, how are you gonna rig up your reverse lever?

[hardkoratvmxr]

i have my reverse cable in on the hotstart lever and it works fine it is hard to push with your thumb but i dont use reverse very much so i did it like that so i could have adjust on the fly and still use reverse when i needed it

and trevor i put a pic in your thread

[kyleschonert]

got ne pics. of that? and i was the one at vanderburgh with the yellow 300EX that was second out of the gate in the main, then couldnt keep my pos. b/c i kept stallin it and wouldnt hit those doubles.lol.

[hardkoratvmxr]

r you the one i passed in the main over the double doubles. If so just to let you know that was the first time i hit those and i wish i had your a-arms and shocks that worked so i could actually do the whoops better

[kyleschonert]

yea. that was me. It was my first race on those a-arms and shocks and i wasnt used to them at all. BUt they did help in the whoops, but i was still bottoming out. Those whoops were harsh. I thought so many times about hitting those doubles b/c my front tires were hittin the landing ramps everytime, but i couldnt work up the balls to do it. NOw i wish i would have b/c i would have done alot better. You would have won if that number 10 wouldnt have been there, he was supposed to be in the expert class but they wouldnt let him switch. hes got his all bored out and stroked. he smoked my *** out of the holeshot and i was in second place and he was baout 15 ft. in front of me. But from your video you did a good job. And congrats on placing there. You headin there for the labor day weekend race? I'll prob. cya there if so.

[hardkoratvmxr]

im me on aim i want to know more i havent heard about the race

[kyleschonert]

all ive got is msn. if you have that mine is honda_rider07@hotmail.com and all i know about the race is that it is on labor day weekend, not sure wha date though. And its at vanderburgh county. Last year it was in princeton and it was awesome, Jerimiah Jones showed up and everything. It was great. I'll try and get you more news when ever i find out.

[hardkoratvmxr]

allright thanks i need all the news i can get

[hardkoratvmxr]

sorry bout the dirt but you gotta ride

http://www.imagestation.com/picture/sraid186/p3dc963c6cc46f1d5c4001314f7b80f13/f25a4d30.jpg

http://www.imagestation.com/picture/sraid186/p18126c2e76404e01fc0ec7603a1cff02/f25a4d17.jpg

what happens when you ride past your quads ability

http://www.imagestation.com/picture/sraid186/p6e26fca8aa8bdd1d011fb48340d6319a/f25a4c3a.jpg

http://www.imagestation.com/picture/sraid186/pf1bc79b4572fb529f3be044487326a93/f25a4bea.jpg

http://www.imagestation.com/picture/sraid186/pa1697ad4ec43b98425ba2131c50f7346/f25a4ba0.jpg

[400ex28]

Looks nice.....I bet the axle helped out alot, shouldent be flipping around them corners again lmfao.

[Honda TRX250ex]

how did that 01 rappy shock mount up
do you need to do ne fabacation to the mounts?

[hardkoratvmxr]

it went on great and a little fabrication was needed to make it work. I had to grind a litte on the bottom side of the top mounts. it is also recommended as a cheap shock mod unlike the 400ex a-arms.

alex i hit the rut it wasnt my fault. lol :D

Originally posted by hardkoratvmxr

alex i hit the rut it wasnt my fault. lol :D


Looking good charlie.....That rut was small. lol

[MX300ex]

deff deff upgrade the bolts that hold hubs on when i took axle off i could turn nut with bare hand and i put it on with a impact..the bolts arent from lsr there some cheapy kind i got when i bought it used..

just for ur saftey..and btw looks sick

[hardkoratvmxr]

i made the bolts os they work and thanks it is gettin there slowly but surely.

[knothead104]

We have a Raptor shock on our 300. It was sent to TCS to be dual rated and it works incredible. Your bike looks alot like my sons except for he has Houser long travel up front. It works incredible. I'll be posting pics of it soon.

[hardkoratvmxr]

i am debating on buying the new front maiers and trimming them to my lkings but i dont know. and the next thing for me is a new front end and i am doen

[300ex13]

hey charlie got my raptor shock yesterday...uhh if u get the new 300 plastics let me kno if you will let the maiers go...just get back to me on it