Wiring removal

[motox450]

Hello everyone. I am thinking of totally removing all excess wires from my quad. I am putting on a crf kill switch to remove the kill switch/light cluster, have removed the front and rear brake light switches, and removed the brake light, headlight cluster. Now the only way to totally remove all of the wiring that goes with those plugs I believe I have to spice the black tape from that huge wiring harness that goes down the center of the frame. Has anyone done this or attempted this before. I know this seems overkill, but I like it to be as clean as absolutely positive. Any info would be great.

Thanks,
Russ

[Mxracer53]

Just so you now you have to have a another hotstart or you cant take the killswitch light box off.:eek2:

[motox450]

I have an ASV lever with hotstart. I am using the stock hotstart cable off of my fcr carb.

[Mxracer53]

ok good luck:D

[the yazer]

i ran my 450r with out the hot start for a while . you dont really need the hot start









but it sure is nice to have back thanks to works connection :cool: