Hydraulic clutch...

[Dannys440]

Does anybody have one, do you like it,Is it worth the money?I am tired of replacing my clutch cables(3rd one and i aint even had it a year yet.)

never had one, but heard they are mint.

I strech my cable out after 3 days of riding. now I have it adjusted tight on both ends of the cable and it still is not disingageing all the way.:o :( . there must be a better quality cable out there than the OEM one.

[Dannys440]

I broke the stock one, then I broke a Motion Pro,mine keeps breaking at the perch.I have no clue how to stop it so i though that the hydraulic ohne would last a life time(As long as you take care of it.).

ya you should look into a hydraulic clutch if you`ve already broken 3 cables in not even a year:ermm:

[MotoX3]

Originally posted by Dannys440
I broke the stock one, then I broke a Motion Pro,mine keeps breaking at the perch.I have no clue how to stop it so i though that the hydraulic ohne would last a life time(As long as you take care of it.). do you have it adjusted and installed correctly?....you might also try spraying a little wd 40 around where it connects to the lever

[Dannys440]

I dont see how i could install it wrong.I will take pics and post them.

Originally posted by Dannys440
I broke the stock one, then I broke a Motion Pro,mine keeps breaking at the perch.I have no clue how to stop it so i though that the hydraulic ohne would last a life time(As long as you take care of it.).

Do you think you might have it a little to tight and your pulling past the stop point of the cutch? causing it to break where its breaking???

Should just be breaking just like that all the time.

[MOFO]

I've seen guys break clutch cables all the time when the perch and handle do not match up properly. Make sure your perch and handle are meant for each other. If they are mixed parts, you could be putting extra stress on the cable at the perch...I'd be willing to bet this is your problem!

RTC lever

[Dannys440]

The lever and perch are stock.I am thinks that where the parking brake is of the handle is to lose and when i pull on it I cant pull strait back and this is causing the cable to fray and break. What can i do to fix it XR400 perch and lever?

Originally posted by MixMasterMike
RTC lever

I have RTC lever and have no problems, and thats even with an old cable.