CHAINSAW
07-24-2005, 02:47 PM
Ive got a super clean ex-dragster 87 shee Im wanting to trade. This was a drag bike back in the day, but has been tuned down to be a duner. It would be no problem making it rip in the drags again.
Here are the specs.
The following is chromed= J arms, lower a arms, all 3 shock springs, +8 swingarm, sprocket and rear brake hubs, axle, tie rods, footpegs, kicker, and a few other odds and ends.
the frame is powdercoated black. The plastic is new, only 4 hours on it Laker Customs. The swingarm is a lonestar I believe, but not positive on that... its a +8" and the dog bone has been polished.
The clutch cover has been polished, along with both cylinders and the head. The pipes are Toomey T4s, along with the toomey silencers. Its got a toomey 2 into 1 airfilter.
the cylinders have been ported and polished, and Im unsure of what bore its on, but the previous owner just had it rebored. The transmission has just been gone through and everything bad or worn replaced. The over flow bottle has been relocated to the front, and its got 2 big inline billet coolers. I also run engine ice in the the motor. The entire motor has been gone through, and there are no problems with it.
A lot of the welds have been smoothed, and some holes filled in up front from when it was a dragster. It also has the stock carbs back on it, to make it a reliable duner again, although throw on some bigguns and Im sure it would be a nice drag bike again.
The new chain only has 4 hours of ride time also.
The front rims are Douglas black labels with stock tires, and the rears are Douglas Red labels/champion beadlocks with 9 paddle 22"x8" haulers.
Im looking to trade for a stock to mostly stock 4 stroke. Id like a Raptor or Predator or any larger bore sport ATV. Id also consider a Z-400 or the kawi or arctic cat versions, or even a DS650. Not interested in 400ex's at all, sorry.
I would even consider a trade for a pretty much stock banshee or bone stock banshee, but would rather get a 4 stroke.
the reason Im wanting to trade, I like to ride big dunes, and do a lot of wheelies. I like to putt around a lot to, and not have to worry about over heating. This banshee is really nice and clean, but it doesnt fit my riding style. There is nothing wrong with it, and you wont be dissapointed. What isnt chromed or powdercoated, is polished... super clean and nice.
Im located in Southwest Kansas (Hugoton) and would drive a ways to meet.
pm me, or email me at midwesttrikers@yahoo.com
http://www.chainsawgraphics.com/blackshee.jpg
http://www.chainsawgraphics.com/blackshee2.jpg
http://www.chainsawgraphics.com/blackshee3.jpg
http://www.chainsawgraphics.com/blackshee4.jpg
http://www.chainsawgraphics.com/blackshee5.jpg
Here are the specs.
The following is chromed= J arms, lower a arms, all 3 shock springs, +8 swingarm, sprocket and rear brake hubs, axle, tie rods, footpegs, kicker, and a few other odds and ends.
the frame is powdercoated black. The plastic is new, only 4 hours on it Laker Customs. The swingarm is a lonestar I believe, but not positive on that... its a +8" and the dog bone has been polished.
The clutch cover has been polished, along with both cylinders and the head. The pipes are Toomey T4s, along with the toomey silencers. Its got a toomey 2 into 1 airfilter.
the cylinders have been ported and polished, and Im unsure of what bore its on, but the previous owner just had it rebored. The transmission has just been gone through and everything bad or worn replaced. The over flow bottle has been relocated to the front, and its got 2 big inline billet coolers. I also run engine ice in the the motor. The entire motor has been gone through, and there are no problems with it.
A lot of the welds have been smoothed, and some holes filled in up front from when it was a dragster. It also has the stock carbs back on it, to make it a reliable duner again, although throw on some bigguns and Im sure it would be a nice drag bike again.
The new chain only has 4 hours of ride time also.
The front rims are Douglas black labels with stock tires, and the rears are Douglas Red labels/champion beadlocks with 9 paddle 22"x8" haulers.
Im looking to trade for a stock to mostly stock 4 stroke. Id like a Raptor or Predator or any larger bore sport ATV. Id also consider a Z-400 or the kawi or arctic cat versions, or even a DS650. Not interested in 400ex's at all, sorry.
I would even consider a trade for a pretty much stock banshee or bone stock banshee, but would rather get a 4 stroke.
the reason Im wanting to trade, I like to ride big dunes, and do a lot of wheelies. I like to putt around a lot to, and not have to worry about over heating. This banshee is really nice and clean, but it doesnt fit my riding style. There is nothing wrong with it, and you wont be dissapointed. What isnt chromed or powdercoated, is polished... super clean and nice.
Im located in Southwest Kansas (Hugoton) and would drive a ways to meet.
pm me, or email me at midwesttrikers@yahoo.com
http://www.chainsawgraphics.com/blackshee.jpg
http://www.chainsawgraphics.com/blackshee2.jpg
http://www.chainsawgraphics.com/blackshee3.jpg
http://www.chainsawgraphics.com/blackshee4.jpg
http://www.chainsawgraphics.com/blackshee5.jpg