Elka Suspension spring changes

[QuadRacer18]

I have a set of front rec tripple rate elkas for the 440ex. I have the softer springs on there now but would like to put the harder ones on, can i take the springs off myself... if so please explain how, thanks!

[bradley300]

run the ride height collar all the way to the top of the shock then put the shock in vice upside down. push the bump stop down. then you and a freind grab the spring and compress it. once its compressed, take off the spring retainer

[sampleez]

there's no need to put them in a vise. i took mine apart yesterday, and once you loosen the preload all the way, i could push the spring down far enough with one hand. just make sure you dont get the springs or crossovers mixed up





yaaaa!!! 900th post :p

[QuadRacer18]

will the spring retainer just twist off with your hand when no pressure is applied from the spring?

[Pappy]

back off the preload adjusting ring

turn the shock upside down ( i usually place the top of the shock on a wooden bench)

pull down on the spring

once the spring is pulled down, remove the keeper.

you may need a buddy to help, but its usually not hard.

[Quad18star]

Most shops sell a shock compressing tool if you want to make it a bit easier . I know at work well sell the for like $15 .