PDA

View Full Version : 426...rough starting?



FoxRacing81
07-22-2005, 01:53 PM
My 426 runs pretty good...but, it sometime takes a while to start. Everytime I start it, I have to pump the gas a little bit...before, it used to start without any gas....what wrong here? Like I said though, once it starts, it runs pretty good.

Do I need a bigger pilot jet? I think there is a 40 in there right now..

Thanks
-Justin

2004exrider
07-24-2005, 07:35 PM
get the 40 out of there and put in a 42 pilot jet. its common that before you start it (when its cold) you pump the throttle 3 times to sprays some fuel in. after it starts feather the throttle for about 15-20 seconds and let off it should idle.

ZSK
07-24-2005, 08:00 PM
If you're running the stock battery I'd reccomend a much larger one. Stock is about 120 cca, mine was in the 300 range. I could fire it up in gear with the clutch out.

If you have a high rev box it may take a little more to start them also.

TC426EX
07-25-2005, 09:39 AM
toss that 40 and go to a 42 pilot

prepracing
07-25-2005, 09:26 PM
also if your battery is getting weak it may not be cranking that BIG piston fast enough to fire right up on 1st crank