Help Please

[BlueZ440]

I have a Z400 and I recently replaced the stator on it. I had to take the flywheel off to get the broken hex screws out and clean it all out.

I installed everything back the way I think I took it out. Everything looks good but now it WON'T START.

I press the start button but all I hear is something spinning but is NOT TURNING THE ENGINE OVER. I also tried pull start but it didn't work.

My friend said that I might of put the one way bearing in backwards?:confused:

Can someone please help..

Thanks

does the nuetral light come on, if the stator is installed right and every thing you might have a blown fuse or some thing

[BlueZ440]

Originally posted by yzfmxer
does the nuetral light come on, if the stator is installed right and every thing you might have a blown fuse or some thing

If I had a blown fuse it wouldn't do anything.Right?.All is doing is spinning when I press Start:ermm:

[dunebuggie66]

yeah your one way bearing must be in backwards, causing your horn fluid to boil not allowing your starter gears to engage.

[BlueZ440]

Originally posted by dunebuggie66
yeah your one way bearing must be in backwards, causing your horn fluid to boil not allowing your starter gears to engage.

Cool thanks..now all I need is to find a flywheel puller again..