MC17X
07-21-2005, 05:27 AM
I want to Trade My 1967 Chevy Nova For A full Mx Quad
This car is very quick and loud. I bought this car about
a 1 and a half years ago. The car was not in bad condition at all. I wanted
to change some things and make it fresh again. I took the old motor out
(305) and had a 327 built by a local machine shop. It has 350hp (L-79 cam)
Rebuilt heads, Weland alum intake, Chrome holley carb, Headers into
glasspacks that exit out the sides, Electric fan, and a whole lot of chrome,
Only about 500 miles on the new motor, Im sure I am forgetting some stuff,
The engine compartment is freshly painted (met silver). The transmission is
a Turbo 350 with a b&m shift kit) Has new u joints installed in the drive
shaft. All of the frame and under body has been undercoated. The chrome on
the bumpers and lights are in good condition, The inside has been painted
(met silver) and jambs painted to. It has a b&m shifter installed. Front
bucket seats with black and grey flames seats covers also the rear seat to
match. The gauge pod in the middle has three gauges in it and will be
painted to match the rest this weekend. Has a 4 inch APC flames tach. The
rest of the inside is original and in great condition, I have the original
bench seat for the car that will go with it. The battery is mounted in the
truck to free up space in the engine compartment. Also the car has no rust
or rot anywhere on it. The car is soild. I also put new brake shoes on it.
Might be forgetting some other things but I have done alot to this car.
Now for the stuff it will need to finish it.
( I like it grey primer But you could paint it I have all the paint and
products to paint it the Met Silver)
finish block sanding it and it will be ready for paint on the body.
Also needs center caps for the centerline wheels (if you choose to)
New tires ( again if you want just stuff I was going to do)
Also a headliner for insidehttp://www.imagestation.com/picture/sraid178/p43b44e2f3cc07c4218837e0e8b6ce80a/f3298eb3.jpg.thumb.jpg http://www.imagestation.com/picture/sraid178/p69eda9f7bd433a7942e677870251c96a/f3298e59.jpg.thumb.jpg http://www.imagestation.com/picture/sraid178/p065bab90644b35c3431e6e1f20ddd043/f3298e06.jpg.thumb.jpghttp://www.imagestation.com/picture/sraid178/p43b44e2f3cc07c4218837e0e8b6ce80a/f3298eb3.jpg http://www.imagestation.com/picture/sraid178/p69eda9f7bd433a7942e677870251c96a/f3298e59.jpg http://www.imagestation.com/picture/sraid178/p065bab90644b35c3431e6e1f20ddd043/f3298e06.jpg
This car is very quick and loud. I bought this car about
a 1 and a half years ago. The car was not in bad condition at all. I wanted
to change some things and make it fresh again. I took the old motor out
(305) and had a 327 built by a local machine shop. It has 350hp (L-79 cam)
Rebuilt heads, Weland alum intake, Chrome holley carb, Headers into
glasspacks that exit out the sides, Electric fan, and a whole lot of chrome,
Only about 500 miles on the new motor, Im sure I am forgetting some stuff,
The engine compartment is freshly painted (met silver). The transmission is
a Turbo 350 with a b&m shift kit) Has new u joints installed in the drive
shaft. All of the frame and under body has been undercoated. The chrome on
the bumpers and lights are in good condition, The inside has been painted
(met silver) and jambs painted to. It has a b&m shifter installed. Front
bucket seats with black and grey flames seats covers also the rear seat to
match. The gauge pod in the middle has three gauges in it and will be
painted to match the rest this weekend. Has a 4 inch APC flames tach. The
rest of the inside is original and in great condition, I have the original
bench seat for the car that will go with it. The battery is mounted in the
truck to free up space in the engine compartment. Also the car has no rust
or rot anywhere on it. The car is soild. I also put new brake shoes on it.
Might be forgetting some other things but I have done alot to this car.
Now for the stuff it will need to finish it.
( I like it grey primer But you could paint it I have all the paint and
products to paint it the Met Silver)
finish block sanding it and it will be ready for paint on the body.
Also needs center caps for the centerline wheels (if you choose to)
New tires ( again if you want just stuff I was going to do)
Also a headliner for insidehttp://www.imagestation.com/picture/sraid178/p43b44e2f3cc07c4218837e0e8b6ce80a/f3298eb3.jpg.thumb.jpg http://www.imagestation.com/picture/sraid178/p69eda9f7bd433a7942e677870251c96a/f3298e59.jpg.thumb.jpg http://www.imagestation.com/picture/sraid178/p065bab90644b35c3431e6e1f20ddd043/f3298e06.jpg.thumb.jpghttp://www.imagestation.com/picture/sraid178/p43b44e2f3cc07c4218837e0e8b6ce80a/f3298eb3.jpg http://www.imagestation.com/picture/sraid178/p69eda9f7bd433a7942e677870251c96a/f3298e59.jpg http://www.imagestation.com/picture/sraid178/p065bab90644b35c3431e6e1f20ddd043/f3298e06.jpg