PDA

View Full Version : ignition advance key



hawaiiansupaman
07-12-2005, 07:41 PM
curtis sparks ignition advance key

does anyone have one of these in thier bikes?? i got one on order now shoould be in the end of th week. any input on these?

Speedy81304
07-12-2005, 09:05 PM
i hear it adds. 2 hp... never used one since i have a white bros rev box. its a simple mod... let me now if you feel a change with power. after you install it.

07-12-2005, 09:17 PM
fast

lil_billy_300ex
07-12-2005, 09:26 PM
whats the deal with them, i thought they dont work well with modified motors or somthin:confused:

07-12-2005, 09:28 PM
ya. no good in motors with bore or high comp piston.

04'400ex'er
07-12-2005, 09:29 PM
Ive never herd of an ignition key giving a 2hp gain, that is as much as a full system and a filter. Ive herd it gives some torque and throttle response. Ive also herd it will cause the motor to run hotter.

07-12-2005, 09:30 PM
with the high comp it will detionate easy.

I am not 100% on why not on a bore. maby just because you always go high comp with a bore... I dono.

Speedy81304
07-12-2005, 09:40 PM
SRP +6 deg key. true on no stock engine it wont work. on stock engines with slip-on mufflers. air filter and jet kit. it will work
just installing it on a bone stock engine they state 2hp gain.
will not work with rev box though. since a rev box changes the ign curve. it a deg key is used it could cause problems.
www.srpmetals.com

enduro400rider
07-13-2005, 02:50 PM
you can run them on high comp motors it just makes it run hotter, if you run air scoops, and a cooler plug you will be fine

hoser 400ex
07-13-2005, 09:27 PM
i talked with tom carlson aboput this before i built my motor. he said that if you had any mods to motor, i told him i wanted one of his 416's he said i would have to run 110 octane all the time and the power increase would be minimal.

04'400ex'er
07-13-2005, 09:40 PM
Originally posted by Speedy81304
SRP +6 deg key. true on no stock engine it wont work. on stock engines with slip-on mufflers. air filter and jet kit. it will work
just installing it on a bone stock engine they state 2hp gain.
will not work with rev box though. since a rev box changes the ign curve. it a deg key is used it could cause problems.
www.srpmetals.com all company's will tell you about a power gain that is really not realistic because they are trying to sell you a product. LRD claims like a 4hp increase in power with their full system on the 400 and anybody that has done their research on exhausts with dyno charts will know that no exhaust for the ex will give a 4 hp gain. maybe 2hp max with a filter.

Speedy81304
07-14-2005, 06:46 PM
i have delt with some major exhaust companys with sport bikes. one company i deal with the most states 9 hp gain on a 600cc bike. this gain. is not by just bolting it on. its a max gain that you can get with tuning the fuel injection and other mods. true most companys lie about power gains so you will buy there parts.

UglyMotha™
07-16-2005, 09:15 AM
Originally posted by mittimj
ya. no good in motors with bore or high comp piston.



uh yah so i'm running a 450 stroker with the timing key and she's only exploded 4 times this summer :o

hawaiiansupaman
07-17-2005, 11:46 AM
so if its not a bored out engine it should me no problem then right?????

UglyMotha™
07-17-2005, 12:11 PM
Originally posted by hawaiiansupaman
so if its not a bored out engine it should me no problem then right?????



my engine is bored, stroked, and high compression and i'm running the key

400exstud
07-18-2005, 10:15 PM
uh yah so i'm running a 450 stroker with the timing key and she's only exploded 4 times this summer

r u serious or just full of it?