Tyler25
07-11-2005, 01:16 PM
I've gotta get rid of this bike! It's not the normal "PredaTURD" that you guys are used to seeing! I love the bike and I will probably cry when it leaves but.. I think it's time for it to go to a new home! I just recently rebuilt the quad from the ground up and there is absolutely nothing wrong with it! I'm asking $7400 but you can send me a PM or if anybody wants to call me with a serious offer you can reach me at 479-530-1576.
Here is the mod list:
2003 Polaris Predator: Sonic Blue Plastics and hood, Brand new 04 frame w/ Rath Pro gusset kit and Powdercoated gloss black w/ clearcoat, 04 Motor/Trans w/ 12.5:1 Wiseco Piston, Milled head, (running prolly 13-13.25:1 compression), Dyna FS CDI, Rath lightened flywheel, Nicholas Cycle Stainless Valves, 3-angle valve job, Nicholas Cycle carb mods, Twin-Air clamp-on filter, Rath Racing Headpipe w/ Black heat shield and Yoshimura Comp-Series Carbon Fiber silencer, Rath a-arms, front bumper, grab bar, pro-peg nerf bars, heelguards, number backing, vented headlight covers, case saver, MX hubs, Rath/JetTrim seatcover, AC skid plate, HPD +2 anti-vibe stem, Moose Flex Series bars w/ Thor barpad, WR450 start button, Pro Design kill switch, 909 grips, Progrip lever grips, Moose Aluminum thumb throttle, Works Connection EZ Adjust Clutch Perch assembly, Honda 400ex complete brake setup w/ Master Cylinder and Polished Cap, Galfer Wave rotors, Galfer lines, Galfer brake pads, Lonestar front Hubs, Hiper Wheels w/ Kenda Klaws on all four corners, PEP Suspension all the way around built by Daryl Rath (set up for 175lb rider), DID chain, PBI aluminum sprockets, Polished Stator Cover, Clutch Cover, Oil Filter Cover, and Water Pump Cover, 2 CFM inline coolers w/ Engine Ice, Powdercoated subframe, axle, front bumper, grab bar, swingarm, axle carrier, fender braces, and many more pieces! This is all the mods I can think of off the top of my head but it is VERY POSSIBLE that there are more mods than that!!
I also have a brand new chrome axle that I have not installed yet. I just got it back from the chromers on thursday. And I have modded the front of my seat to keep it from coming off! I have not done the rear mod yet but I will do it in the next week or two. Everything else that I have laying around will also go with it quad!
PLEASE..... NO PM's ABOUT PARTING OUT!!!! This bike will go complete or not at all!!
Pics:
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20018.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20011.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20012.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20015.jpg
Here is the mod list:
2003 Polaris Predator: Sonic Blue Plastics and hood, Brand new 04 frame w/ Rath Pro gusset kit and Powdercoated gloss black w/ clearcoat, 04 Motor/Trans w/ 12.5:1 Wiseco Piston, Milled head, (running prolly 13-13.25:1 compression), Dyna FS CDI, Rath lightened flywheel, Nicholas Cycle Stainless Valves, 3-angle valve job, Nicholas Cycle carb mods, Twin-Air clamp-on filter, Rath Racing Headpipe w/ Black heat shield and Yoshimura Comp-Series Carbon Fiber silencer, Rath a-arms, front bumper, grab bar, pro-peg nerf bars, heelguards, number backing, vented headlight covers, case saver, MX hubs, Rath/JetTrim seatcover, AC skid plate, HPD +2 anti-vibe stem, Moose Flex Series bars w/ Thor barpad, WR450 start button, Pro Design kill switch, 909 grips, Progrip lever grips, Moose Aluminum thumb throttle, Works Connection EZ Adjust Clutch Perch assembly, Honda 400ex complete brake setup w/ Master Cylinder and Polished Cap, Galfer Wave rotors, Galfer lines, Galfer brake pads, Lonestar front Hubs, Hiper Wheels w/ Kenda Klaws on all four corners, PEP Suspension all the way around built by Daryl Rath (set up for 175lb rider), DID chain, PBI aluminum sprockets, Polished Stator Cover, Clutch Cover, Oil Filter Cover, and Water Pump Cover, 2 CFM inline coolers w/ Engine Ice, Powdercoated subframe, axle, front bumper, grab bar, swingarm, axle carrier, fender braces, and many more pieces! This is all the mods I can think of off the top of my head but it is VERY POSSIBLE that there are more mods than that!!
I also have a brand new chrome axle that I have not installed yet. I just got it back from the chromers on thursday. And I have modded the front of my seat to keep it from coming off! I have not done the rear mod yet but I will do it in the next week or two. Everything else that I have laying around will also go with it quad!
PLEASE..... NO PM's ABOUT PARTING OUT!!!! This bike will go complete or not at all!!
Pics:
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20018.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20011.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20012.jpg
http://www.predatorowners.com/memberphotos/predator/1995/team%20freedom%20015.jpg