400ex motor parts TC cam head bottom end

[K_Fulk]

I may be parting out my motor i'll be ready to start tearing down by wednsday.

Tc 924 mx grind cam with rocker cover and rockers $200

Tc fully race ported head complete with oversized intake valves, springs, etc $400

Cylinder has an 88mm bore, i'll throw in the piston I have been using also. $150

Bottom end, Has carillo rod installed great shape. Install your clutch , flywheel, shifter and side cases and you will be in business. $500

[K_Fulk]

I could also sell the motor complete, minus the clutch, flywheel, side covers and starter. I havent it taken it apart yet. I will sell it cheaper that way also.

[Chino886]

Is 88mm bore=426? What is the lowest you will go on the cylinder? How many hours since the rebuild?

[K_Fulk]

I re ringed and honed it a year ago when I blew a headgasket. It has always had an 88mm bore since ive owned it. I will go a little lower.

I want to wait till at least friday before I start tearing it down. Incase someone wants to buy it complete.

[Chino886]

Let me know, I am interested if you tear it apart? That would be 426 right?

[K_Fulk]

Yeah

[Chino886]

would you do $125 shipped? 64014

[K_Fulk]

Yeah i would.

[Chino886]

Get a hold of me if you part it out, I would buy the cylinder from you.

[PimpC]

I'm interested in the head, what exactly does it have done?

[K_Fulk]

Its fully ported. The valves may be stainless, I would have to check.

[Quad411]

Give me a good price on the head Quad411@aol.com

[K_Fulk]

If you dont like the price thats posted make an offer. ;)

[PimpC]

oversize valves or stock? can you send me some pics?

[K_Fulk]

Stock sized valves, I can get you some pics of it apart next tuesday. Need to run 1 fair race before I tear it down.

But here is a picture of it together.

[plkmonster2]

What would you do for just the mx cam? I don't need the cover, and I though you would want to sell it with the head. LMK

[K_Fulk]

I would sell the cam for 150 with out the rockers and cover. I figured if I sold them together it would be less likely someone would use it with hardend or worn out rockers.

If you would want to buy the cam and head I would make you a better deal.

[plkmonster2]

I see what you mean, because that cam has broken into those rockers. I just don't have the money for both right now. I'll let you know though.

[K_Fulk]

Well it will be a week before I can ship this stuff out.

[K_Fulk]

I'll be able to get it tore down tuesday for sure now.

I'll also have a moose billet basket for sale.

[K_Fulk]

Motor is out will have some pictures tommorow.

[sprtrx300ex]

K_Fulk, you have a PM.

[Pvt. Maggot]

How much do you want for the motor without the parts you said you'd take off..basically without the flywheel sidecases and such. :)

[K_Fulk]

Head

[K_Fulk]

cam

I'll get pictures of the cylinder and bottom end if someone local here does not buy it.

PVT,
Motor without that stuff 1100

[K_Fulk]

Bottom end.

[K_Fulk]

cylinder

[PimpC]

$400 for the head, cam and cover?

[K_Fulk]

Originally posted by PimpC
$400 for the head, cam and cover?

I'll do that but it will be $150 for shipping, :blah:

[enduro400rider]

hey did you sell the cylinder? if not im very interested in buying it. is the bore still good? did you resleeve for the 426? what kind of piston? LMK

[PimpC]

let me know when your ready to sell

[K_Fulk]

Everything is spoken for now.