250r rider 88
07-01-2005, 08:00 PM
Ok heres the deal went to ride my 86 250r today and it didnt want to start , checked the plug it was fouled replaced and it fired right up but ran like **** got 50 feet and it died wouldnt restart. tried different plugs all day still no go any ideas?
Its also had gas sitting in it for over a month so Im gonna put fresh gas in it tommorow
Heres my mods what jet, needle clip position and air screw turns do you think i need?
FMF Fatty exhaust, K and N filter boyesson rad valve thats it for intake im in southern indiana, my elevation above sea level is about 700-800 feet
my needle jet was on the 4th position and my main jet is a 150 the air screw is out 2 turns and my gas to oil is 32:1
i run a ngk br7es spark plug
any help would be great thanks
Its also had gas sitting in it for over a month so Im gonna put fresh gas in it tommorow
Heres my mods what jet, needle clip position and air screw turns do you think i need?
FMF Fatty exhaust, K and N filter boyesson rad valve thats it for intake im in southern indiana, my elevation above sea level is about 700-800 feet
my needle jet was on the 4th position and my main jet is a 150 the air screw is out 2 turns and my gas to oil is 32:1
i run a ngk br7es spark plug
any help would be great thanks