View Full Version : Securing Tool container lid on 400EX
Green95Hoe
06-30-2005, 04:17 PM
When I bought my 400, there wasnt a tool container. I picked one up on E-bay but the lid is very loose and im sure it will fall off before I get out of my yard. Has anyone figured out a way to secure it from unscrewing and popping off. I was thinking about some sort of cotter pin or something but figured id ask first since a search turned up nothing and im sure my fellow 400/300 owners have run into this problem before. Thanx
~Brad
future 450?
06-30-2005, 04:28 PM
that used 2 happen 2 me alot ure prob not puttin the lid on tight enough jus turn it till lik u feel it goin2 space
Green95Hoe
06-30-2005, 04:45 PM
I wish it was that easy. Its definetly screwed on all the way
yellowWB400ex
06-30-2005, 05:52 PM
drill a small hole on the top and shove a cotter (sp?) key through
Green95Hoe
06-30-2005, 06:16 PM
In my mind im envisioning a cotter pin but im not sure what would keep that from coming out. Although I think I have an idea. I was kinda hoping someone would have a pic
~Brad
HondaEXrider22
06-30-2005, 07:51 PM
Hose clamp
Some sorta rubber band
Cotter pin
Glue.......lol j/k
jak1389
07-01-2005, 07:24 AM
i didnt use any of that stuff. i jsut put a rag in the tool case and put it there kinda loose. then i had a harder time putting the cover on again. when i finally got the cover on i knew it wasnt going anywhere because the built up pressure from the rag onto the cap would keep it there. give it a try.
400Rider022
07-01-2005, 09:48 AM
happened to me very easy fix for this one ok take some electrical tape and wrap around threads a couple of times then screw cap back on... it should be very tight :D
400Rider022
07-01-2005, 09:50 AM
simple fix to this one.. wrap some electrical tape around threads then screw cap on ... works like a charm:D
jak1389
07-01-2005, 09:57 AM
400Rider022 where in north nj are you?
nacs400ex
07-01-2005, 10:58 AM
You could drill a hole straight down in both the cap and the box. The cotter pin would hold the cap from turning off. Cotter pin might look a little tacky though.
I think the electrical tape on the threads would be a cleaner fix.
derekhonda
07-01-2005, 11:09 AM
or drill two tiny holes and wrap a real small black ziptiein a loop and then cut off the excess. Just have a knife with you when you are riding and some spare zip ties in the tool caddy.
Green95Hoe
07-01-2005, 12:23 PM
Thanx guys, some good ideas there. Ill give the electrical tape a try and see how that works out for me. I know im gonna have a rag in there anyway.
m_townsgreatest
07-01-2005, 12:26 PM
well my cap fell off but my kit stayed in and i didnt want to worry about losin the tools so i took the case thing off and just carry a book bag
m_townsgreatest
07-01-2005, 12:26 PM
well my cap fell off but my kit stayed in and i didnt want to worry about losin the tools so i took the case thing off and just carry a book bag
m_townsgreatest
07-01-2005, 12:26 PM
well my cap fell off but my kit stayed in and i didnt want to worry about losin the tools so i took the case thing off and just carry a book bag
m_townsgreatest
07-01-2005, 12:31 PM
i just took it off cuz my cap fell off and i didnt want to lose the tools so i carry a book bag and i dont even know its there but yeah i just took the whole thing off
CannondaleRider
07-01-2005, 02:13 PM
wow, it took you 4 posts to get that across? lol
Anyways, i agree, i would just get a Camelbak or something, and keep it in there, then you could have water, plus carry whatever else you want too
m_townsgreatest
07-02-2005, 05:30 PM
well my computer was messin up and it posted it and i didnt know it lol
Green95Hoe
07-02-2005, 06:21 PM
Thanx guys, A couple wraps of the electrical tape and it couldnt fit better. Nice and snug and if I want it tighter I can just wrap it again. Plus as a bonus the tape keeps it well sealed from dust and water. Im glad I didnt go drilling holes in it.
~Brad
400Rider022
07-02-2005, 09:51 PM
what did i tell ya:D and jak i live in montville u
jak1389
07-03-2005, 03:53 PM
i live up in rockaway.
400exrules
07-04-2005, 06:11 PM
take the thing off.......wtf do u need the tool holder for anyways?
looks ugly as hell anyways, i yanked mine off and threw it on the shelf
jak1389
07-04-2005, 06:45 PM
Originally posted by 400exrules
take the thing off.......wtf do u need the tool holder for anyways?
looks ugly as hell anyways, i yanked mine off and threw it on the shelf
umm, to start it is good for holding your tools. i keep my insurance and registration, tire plug kit, spark plug, and some spare tools in there. they are very handy.
bwamos
07-05-2005, 11:00 AM
I drilled a hole in my cap & thread area of continer with the lid on. Then used a ball detent bolt pin like you use on the bolt of a paintball gun (like the AutoCocker). Use thumb to push button, and remove, unscrew cap. works like a charm.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.