YFZ tie rod post(WTF ever)free

[Dave83]

When I bought my a arms (used) they came with some really nice chrome tie rods that use Heim ends,but not with the post for the stem or spindles.I call up k&k and the guy says I need these post(I think he said Gibson made them).I gave 130.00 for 4 of them then the damn things were too big for the heims on the rods.i barely ground on one of them the other 3 are like new except for laying in toolbox.If anyone has use for them,they can have them.Also have the +2 tie rods with the heim ends but I tried cutting out the dia of the heims so the need replaced,also free if some can use them.

[Billyu40]

Man I dont know what you are talking about and I dont need the parts but you sound like you need a hug(not from me though). I would be quite pissy to if I wasted my money like that.

[panteramatt]

Take em to a machinist and have them put em on a lathe.

[YZ400EX]

If you are still interested in giving them away I will take them..let me know what you wanna do..Thanks

[Dave83]

Haha Billy<thats a minor amount compared to some of the junk I have laying around that will not be used.Hers a pic of the end link(just hit me what they are called) and the tie rod.Just so they are what everyone thinks they are.I see no way of making the endlinks work on Honda spindles,they are way tall.I could be wrong.

[Dave83]

tie rod(I have both of them and I may have only bored out one of the heims,Ill have to look)

[Foxracin]

Ill take them.