MXjunkie's Banshee

[chucked]

It's stuck in his house, he can't get the sliding glass door to open because the foundation shifted and jammed the door. LMAO!

[Atkins]

Hahahahaha, its stuck there forever! I always thought it looked too nice to ride.

[HondaEXrider22]

lol that SUCKS!

[Doober]

hahaha man that must suck

[theTman]

hell get it out im sure

[Hondadudeehhhh]

she'll buff out

[Hon300ex]

that sucks!! im sure that he will find a way to get it out though...

[2004exrider]

just wheely thru the door!!!

[DeerNuts]

Originally posted by 2004exrider
just wheely thru the door!!!

yeah that makes it a lot less wide
:rolleyes:

[theTman]

i dont think it helps that he has offset rims and a +4 axle:o

[LTZ400rider]

is that door possible to fix without tearin out concrete? id just stand it up and put it on a dolly and roll it out sideways

[CdaleXtreme]

wheels off, bars bent down, and shocks off if needed, get three of your friends and turn it sideways!

Reassemble and go riding!

[chucked]

Originally posted by CdaleXtreme
wheels off, bars bent down, and shocks off if needed, get three of your friends and turn it sideways!

Reassemble and go riding!

Well yea, the biggest problem lies here: He was going to be storing it in his living room, ie: he doesnt have a garage or shed or anything.

[Atkins]

You can build a decent shed out of a truck bed cover, a few few 2by4s and a few tarps.

[chucked]

Originally posted by Atkins
You can build a decent shed out of a truck bed cover, a few few 2by4s and a few tarps.

you must not have seen his banshee yet.

[Mxjunkie]

I built a quad in a house! lol man I'm pulling my hair out! I keep looking at the canyon and wondering if I should just run it through the doors LOL, I'll figure it out! :scary:

this thing has been 6 months in the making and right when I finish it it throws another curveball, damn thing I'm about to ride it in the house lol..


great! now my dad took his harley out the door and said " Mine fits! " :grr:

[Mxjunkie]

Originally posted by Atkins
You can build a decent shed out of a truck bed cover, a few few 2by4s and a few tarps.

The kids here would have it stolen in a matter of no time if I did that lol


I'll buy damn barn doors or french doors if I have too, I wanted to ride the thing today :(

[FoxRacing81]

haha Oh *****!!

That sucks dude. You'll figure it out.

[chucked]

haha i wish i lived closer so i could go over there and laugh at u!

[Mxjunkie]

Originally posted by chucked
haha i wish i lived closer so i could go over there and laugh at u!

ha ha ha get your and Jesses butt down here with some hammers I'm buying a new door your going to help me put it up :scary:

[brian-250]

look on the bright side, youll have one badass coffe table if you dont get it out.:D

[theTman]

u can do it joshie!!!!!

[theTman]

ahahaha

[Cr85rRida]

LMAO. Break the glass dorrs with hammers lay a rug down ride threw it then buy new glass doors.

[Punk'd]

Take tires off bend handle bars down and get 2 people to pick her up and turn her sideways? I dunno bro.. lol

[brian-250]

Originally posted by Punk'd
Take tires off bend handle bars down and get 2 people to pick her up and turn her sideways? I dunno bro.. lol


nope.:o

[YFZ450Ridr]

can u unscrew or unbolt the tracks that the doors slide on and take everything off.

[HondaEXrider22]

Yea if you got to replace them i would just break them

[Mxjunkie]

Originally posted by 250EXridr
can u unscrew or unbolt the tracks that the doors slide on and take everything off.

thats what we tryed but the foundation moved and its compressing the doors not allowing them to come off the tracks, and I dont have the money to f up those doors at the moment. I was so pissed off at it I found an old s-10 350 conversion truck me and my dad built that I was ready to sell the quad for BUT my badluck came and he blew up the 450horse small block we had in it and put some POS heads etc on it soo my luck SUCKS lately :scary:

[chucked]

Originally posted by Mxjunkie69
thats what we tryed but the foundation moved and its compressing the doors not allowing them to come off the tracks, and I dont have the money to f up those doors at the moment. I was so pissed off at it I found an old s-10 350 conversion truck me and my dad built that I was ready to sell the quad for BUT my badluck came and he blew up the 450horse small block we had in it and put some POS heads etc on it soo my luck SUCKS lately :scary:

sounds like the cry of a male b^tchasaurous

[Mxjunkie]

I sure am and I'm one miserble one too

YOu do know there are adjustment screws for the sliding glass door rollers that you can loosen to be able to lift the sliding door and take it out right???

dont worry at least you had a plan on how to get it out, when i finished mine, i didnt even think of it, had to end up having 4 guys lift it over the wall.

[JOEX]

Originally posted by LTZ400rider
is that door possible to fix without tearin out concrete? id just stand it up and put it on a dolly and roll it out sideways
:cool:

[JOEX]

Originally posted by LTZ400rider
is that door possible to fix without tearin out concrete? id just stand it up and put it on a dolly and roll it out sideways
:D

[Mxjunkie]

My door doesnt even open that wide, put it this way, my dad has to lean the harley and such to get it out :ermm:

[Snow]

YOUR DOOR SUCKS!

[Mxjunkie]

thats as wide as it opens :ermm:

TAKE OUT THE 2 SECTIONS!!!!


LIFT AND PULL!!! SIMPLE!

[Snow]

Originally posted by DierWolf
TAKE OUT THE 2 SECTIONS!!!!


LIFT AND PULL!!! SIMPLE!

read all the other posts! the foundation moved and its compressed in there

[Mxjunkie]

uh didnt you read?! the foundation moved and it is compressing the doors and we cant get them off the tracks.


I'll probaly get a 4X4 or a 3X6 and a 2ton car jack and see if I can really f the door all up and see if I can move stuff around and get it up out of there.

Here!! steps 2 and 3 only... maybe not even step 2

http://www.popularmechanics.com/home_improvement/home_improvement/1275791.html?page=2&c=y

Yes i read!

doest matter if it shifted, there is 1 inch of space on the top! obviously the door can still slide so there is still space to lift it, only requires about 1/4 inch lift to get it off the bottom rail.

[Mxjunkie]

My dad (250+ pounds) jerked on it etc and we still cant get it to over, its a PINTA to slide, its been that way for a year now. I'll even take a picture where the carpet bulges up where its lifted, the first 3-5 inches will come off till it gets to where its lifted and we cant get it to budge whats so ever.

Ok i give up... obviously you didnt even bother reading the link i sent you....

Call a contractor he will do it for ya.

[FoxRacing81]

IMO, I'd take it apart to get it out. But before you do, save up and build a shed.

Or knock the doors out and put up a garage door! Either one will take time and money though.

[Mxjunkie]

Hm we owned a contracting buisness for years, we KNOW how to take a door apart we arent idiots, it WONT come out either way

if all else fails I'll just take it apart and put it togather outside idc

[JOEX]

Originally posted by Mxjunkie69
thats as wide as it opens :ermm:
This may be a long shot.....

Lift the quad onto the rear tires and grab bar like in the pic I posted

Remove the front tires and loosen the handle bars so they drop...

Put a ratchet strap tie down on the grab bar and axle then ratchet to compress the rear suspension.....

Wiggle the quad through the door...


I thought I had it bad:p :devil:

Hmmm shifting foundations, built it with your contracting business? :)

All i can tell you from "MY" Contracting and Architectual experiance is, if it can still slide it can still lift out.

Happy Chair Racing!

[Mxjunkie]

Hm no we didnt build this house fyi :rolleyes: why does everyone have to be a frickin stick in the mud on this site :ermm:

we just redid our backyard and the slab goes out 6-7ft, we had 2 bob cats, 1 case loader and a mac dump truck going over it and it cracked it all the way across, so I dont doubt that had something to do with it.

Do This when dad's not around.

http://kprf.ru/clipart/misc/break_glass.jpg

That'll force him to fix it :)

http://www.island-designs.com/pictures/lololol.jpg

[Mxjunkie]

:scary:

[LTZ400rider]

lmao funny pic

so im guessin u brought the quad into peices since the door been jammed a long time? just knock it out and put barn glass doors on it or something. since the foundation is messed up would that drop the value of ur home?

[Mxjunkie]

nope, when ever I get the money I'll put barn doors in, I actually just thought of something as well, I'd bet the track is bent from the harley going over it all the time (600+ pounds) :chinese:

but yeah I brought it into the house in pieces because we took the door apart the last summer to get my lt80 out of the dining room to sell it so we figured they will come apart still, I guess not oh well, I'll get barn/french doors in the next month or so and get the quad out.

[250R-Dee]

I'm glad I was able to get my 250r project out the house. I had to do some funky twisting and it took and 20 minutes to clear the door but I managed to do it. After removing the handlebars and plastic things got much easier. My japanese neighbors thougt I was crazy after they saw the finished project sitting on my porch....hahahaha


Yes, the attached pic was taken in the living room of my Japanese house and I think I am the only person on this tropical ROCK who has a fireplace.

[chucked]

Originally posted by Mxjunkie69
Hm no we didnt build this house fyi :rolleyes: why does everyone have to be a frickin stick in the mud on this site :ermm:

we just redid our backyard and the slab goes out 6-7ft, we had 2 bob cats, 1 case loader and a mac dump truck going over it and it cracked it all the way across, so I dont doubt that had something to do with it.

there's the problem, bobcat and case are junk.