Seat Pan Question

[TheFontMaster]

Are all 250r seat pans the same. I know the atc ones are differnt than the trx ones. But did they change the seat pan at all, I know they made alot of little differences.

[Rich250RRacer]

Originally posted by TheFontMaster
Are all 250r seat pans the same. I know the atc ones are differnt than the trx ones. But did they change the seat pan at all, I know they made alot of little differences.

88-89 are different from 86-87. 88-89 had an integrated front hold down, requiring holes in the fender for them to pass through and the later years also used a different latch assembly.

[TheFontMaster]

Sow will an 86 wok on an 89 as long as it has the right plastics?

[Rich250RRacer]

Originally posted by TheFontMaster
Sow will an 86 wok on an 89 as long as it has the right plastics?

You will have a problem with the rear latch assembly. The front will work fine on an 88-89, if you have the 86-87 bolt-on front hold down. You can get creative and fab something for the rear latch.

[Dave83]

Just use an aftermarket rear latch and you will not have any problems.

[keller45]

Ive seen the ATC 250r seats on regular 250rs before

[deathman53]

really????????? atc 250r seats on trx's, I have both and they won't interchange, nor will the seat latch. you might be confused as they put atc seat covers on the seat foam(they are a close fit)