Hmf Leak.............

[2001400exrider]

ok, right where the header and pipe fit together where the clamp goes on it leaks a little bit....why can i do? (besides call HMF) i orderd from parts direct..NEVER AGIAN WORST CUSTOMER SERVICE EVER:mad:

like seal it with some high temp somthen?

[FasstMidnightZ]

ya my fmf megamaxx2 does the samething, nothing much u can do. except make sure its real tight, i can barely even feel mine, so its not that big of a deal. How much is it leaking ?

[2001400exrider]

VERY little and i tightend it somemore and now its even smaller...before i tightend it some black **** was shooting out from there. i called Canadian tire and they said i could put some high temp exhaust cement on it....

[chucked]

Pretty much every exhaust system leaks there....

[350x_mutt]

there is a way. its real hack but it works. use a chopped up soda can that fits the collar on the headpipe and doublu up untill it is snug when you put the silencer on/

[hondarider2006]

I use high temp silacone, seems to work for a little while...but justabout anything you do is going to leak a little ways down the road. I would use the high temp stuff, and tighten the piss out of it....if it continues leaking try that soda can idea...seems kinda cheezy though.

[standardryder]

http://rockymountainatv.com/Product_Details.atv?pid=00002883

that might work?

[standardryder]

or go to your local atv dealer and see if they have some aspestice(dunno how to spell it) that might work to

[bwamos]

Thats why I like my full pipe. ;)

Could wrap it with a layer of fiberglass exhaust tape then put the clamp over it and tighten her down.

[MadMax27]

My HMF full leaked where the header and pipe slip together, I moved the clamp closer to the ends, and tightened it up good. No more leaks for me....

[2001400exrider]

i dont wana overtighten the clamp and break it tho:ermm:

use some high temp silacone or aluminum foil