PDA

View Full Version : Need Answers...?Blaster?


300exr
06-16-2005, 08:29 AM
My friend has an 01 blaster and he wants wider a-arms and axle. He asked me if +3 arms and a +6 axle would be to wide for mostly trail riding and occasional track riding, I dont know so im asking you. Thanks
badass250r
06-16-2005, 08:42 AM
thast pretty big for trails tell him to save his money and buy a stock banshee axel and disk hub a banshee axel is 2+2 on a blaster
bradley300
06-16-2005, 09:33 AM
plus 3's are fine for a blaster, plus 3's with stock wheels bring the overall width to 46 inches, which is what every 450 is stock, so your ok.
2000blasterboy
06-16-2005, 09:57 AM
i have +3+1 ASR's and i reccomend them or SMS +3+1 would be good, and a nice set of elkas would be a help too lol, and as for an axle, i have a banshee axle on mine, but i have an 05, and 03+ are the only ones that can have a banshee axle without mods, i would suggest a G-force axle that is cheap and good becasue you can adjsut it between +2 or +3;)
2000blasterboy
06-16-2005, 09:58 AM
Originally posted by badass250r
thast pretty big for trails tell him to save his money and buy a stock banshee axel and disk hub a banshee axel is 2+2 on a blaster
no its not i have one, its close lol its +3.5 total, but he would need a banshee disk hub and banshee brakes and a custom brake mount....
badass250r
06-16-2005, 10:53 AM
a boho .5in haha i got an lsr on my blaster
2000blasterboy
06-16-2005, 11:25 AM
Originally posted by badass250r
a boho .5in haha i got an lsr on my blaster
lol yeah figured i would say that lol most consitter it +3 over stock tho... but not according to the measurements lol and my rear end is +5.5 over stock anyways lol
badass250r
06-16-2005, 11:31 AM
how wide are u im at 49 or 50 in
2000blasterboy
06-16-2005, 12:27 PM
i am at:
rear:48in
front:44in
i am going to get flush valve stems so i can flip the fronts, and if i keep the blastrer i am getting a G-force or LSR or RPM axle in banshee +2 or +4 so... i think after i get porting i am getting a axle, then i am done.....but yet i already said i was done, but i am sending my motor out lol
blasterak
06-16-2005, 01:57 PM
You should be fine like bradley said you should be about the width of a 450 so your fine