paddles

[400EX QUADER]

What size and how many paddle haulers should I put on my 416ex with a full pipe,revbox, fcr 39mm, aggressive port/polish,je 10:8:1,stage 3 hotcam and sandstar fronts.
Thanx,cory

[400EX QUADER]

ttt!

[orvs4me]

There's to many variable you have'nt answered.
Do you want to just climb hills?
Is all you want is strait line get-up-and-go?
What gearing do you have?
How tall of a tire do you want to run?
All of these factor into the the final selection.

[QuadJunkies]

What he said^^^
I also moved this to the appropriate are that you may get more responses in. Im gonna say a 8 paddle as a general rule

[400EX QUADER]

I like to climb hills and drag race but i'm not serious about it. I will run a 14 or 15T sprocket so it just depends which works better. I want a tire that I can spin easy so it doesn't bog and can accelerate up a treeshot quick. I have sandstars but they don't hook up as good as my friends 20" 8 paddle haulers.

[QuadJunkies]

Originally posted by 400EX QUADER
I like to climb hills and drag race but i'm not serious about it. I will run a 14 or 15T sprocket so it just depends which works better. I want a tire that I can spin easy so it doesn't bog and can accelerate up a treeshot quick. I have sandstars but they don't hook up as good as my friends 20" 8 paddle haulers. If you want to climb, then you want a straight paddle, Im not a fan of the rear or front SandStars myself(we have a set too) I run 14 and 15 sprocket, I LOVE my Turbo paddles and the Haulers both. Both are 8 paddle for mine, I wouldnt go any more paddles than that

[400EX QUADER]

What mods are done with the one that uses haulers (Is it the 440 in ur sig?) and would 20-10-8 8 paddle haulers be good because it can turn em good but with the 8" rim they still will baloon out a little with lots of tire spin.

[mattonln]

I would run either the 20x10x10 or 20x10x8 8 paddle haulers depending on what your looking for. 20x10x8 gives a more comfortable ride because of the sidewall height, but doesn't look as good. I hate my sandstars for doing treeshots too, they dig way too much without giving you forward motion.

[QuadJunkies]

Originally posted by 400EX QUADER
What mods are done with the one that uses haulers (Is it the 440 in ur sig?) and would 20-10-8 8 paddle haulers be good because it can turn em good but with the 8" rim they still will baloon out a little with lots of tire spin. I use 20-10-10- 8 paddle. thats on my 440ex, we also used them for our Predator and loved them. We are using a 21-12-8- 8 paddle to try out on the YFZ450 this wk end ,should be nice for drag racing up hills :devil: but We may switch them over later in the week to try out for other types of riding :)

[400EX QUADER]

sweet

[kwatts400]

Originally posted by mattonln
I would run either the 20x10x10 or 20x10x8 8 paddle haulers depending on what your looking for. 20x10x8 gives a more comfortable ride because of the sidewall height, but doesn't look as good. I hate my sandstars for doing treeshots too, they dig way too much without giving you forward motion.

I have 20-10-8 haulers on my 250r and they are sweet for hills and drag racing on my r. I'm using them on my 450r this weekend, and they should be more then enough for it. I would go with the 8 inch rim for all around riding.