PDA

View Full Version : Killswitch Teather Wireing?


Quinn01
06-08-2005, 03:24 PM
Alright, im sure this question has been asked before, but i took the teather off my blaster and want to put it on my 01 400ex. Can someone take me through it step by step on how to wire this bad boy up?
FoxMxRiders
06-08-2005, 03:31 PM
You connect the long wire to the black/yellow stripes that is connect to the cdi and the short one on the ground.

Here the link

Installation (http://www.off-road.com/atv/reviews/products/ProDesign/)
Quinn01
06-08-2005, 03:49 PM
haha you seem to be the one to always anwser my questions and save my *** all the time.

haha thanks man!
Quinn01
06-08-2005, 03:55 PM
oh one more question before i go out there.


Do i cut the black and yellow wire and just mesh it with the wire from my killswitch?
FoxMxRiders
06-08-2005, 09:25 PM
Originally posted by Quinn01
oh one more question before i go out there.


Do i cut the black and yellow wire and just mesh it with the wire from my killswitch?

Don't do that your bike will never start again

Just do a contact with this wire,don't cut it because its the fire impulsion that goes to CDI then go to the coil and to your sparks plug

I don't realize that its always me that answer your question hahaha :D
Quinn01
06-10-2005, 11:15 AM
is the ground wire usualy the wire with the white stripe, or is the ground wire usualy the one that is solid black???
FoxMxRiders
06-10-2005, 12:44 PM
usualy the atv ground wire is green

but just put a connector on the ground wire of your killswitch and bolt it on the frame it would do the same thing.Thats the way I do mine,I bolt the killswitch ground on my left fender bracket that hold it to the frame and it work
Quinn01
06-10-2005, 01:05 PM
yeah thats how i was going to do it, but i wasnt sure which wire was the ground wire. Its got 2 wires, one solid black wire, and one black wire with a white line down it. Im not sure which ones the ground. I had this teather on my blaster, and i had the local dealer take it off cause the quad was in the shop at the time. They just snipped the wires rather then taking them off the right way because they are a bunch of *******s.

So now the wires are not only snipped, i dont know which ones which, AND the wires are cut damn *** small. :grr:
FoxMxRiders
06-10-2005, 01:09 PM
I can you take a picture of it ??
Quinn01
06-10-2005, 01:11 PM
yeah ill grab one later.
FoxMxRiders
06-10-2005, 01:13 PM
I add you to my buddy list then if you have question send me a PM ;)
whc
06-21-2007, 05:35 PM
foxmxrider thanks for info, made copy of article. Bill